How to Change Battery in Dodge Durango Key Fob

Changing a battery in your Dodge Durango key fob is a quick and easy process that can save you time and money. If your key fob is acting up, a dead battery is often the culprit. Learning how to do this yourself can prevent the inconvenience of a non-functional key fob. Let’s walk you through the steps.

Identifying Your Dodge Durango Key Fob

Before you begin, it’s important to correctly identify your Dodge Durango key fob type. Different model years may have slightly different designs. Knowing your Durango’s year will help ensure you find the correct instructions and battery type. Need help figuring out which battery your key fob takes? Check our guide on 04 dodge durango key fob battery.

What type of battery does a Dodge Durango key fob use?

Most Dodge Durango key fobs use a CR2032 battery. These are readily available at most stores that sell batteries. Having a spare on hand is always a good idea.

Gathering Your Tools

You’ll need only a few simple tools for this task: a small flathead screwdriver or a similar tool for prying open the key fob, a new CR2032 battery, and optionally a small tray or container to keep the small parts organized.

Where can I find a CR2032 battery?

CR2032 batteries are readily available at most pharmacies, electronics stores, and even some grocery stores. You can find out more by reading key fob battery dodge durango 2017.

Step-by-Step Instructions for Changing the Battery

1. Locate the release button or notch: Examine your key fob. There’s typically a small button or notch where the key inserts into the fob.
2. Release the emergency key: Press the release button and gently slide the emergency key out of the fob.
3. Open the key fob: Insert the flathead screwdriver into the notch or seam created when the key was removed. Gently pry the two halves of the key fob apart. Be careful not to damage the plastic.
4. Remove the old battery: Once the key fob is open, you’ll see the battery. Carefully pry it out using your screwdriver or fingernail.
5. Insert the new battery: Place the new CR2032 battery into the compartment, making sure the positive (+) side faces up, just as the old battery did.
6. Close the key fob: Align the two halves of the key fob and press them together until they snap shut.
7. Test the key fob: Try locking and unlocking your Durango to ensure the new battery is working correctly.

Dodge Durango Key Fob with New Battery Installed

“A common mistake people make is inserting the battery incorrectly,” says automotive locksmith expert, Robert Johnson. “Always double-check that the positive side is facing upwards.”

Troubleshooting

If your key fob still isn’t working after changing the battery, there might be other issues at play. Try checking the key fob’s programming. Sometimes, a dead battery can cause the fob to lose its programming. If you suspect this is the case, refer to your owner’s manual or contact a qualified automotive locksmith. Worried about your key fob battery dying? Read is there a way to test a key fob battery. It’s a great resource for keeping your key fob in top condition.

Testing the Dodge Durango Key Fob After Battery Replacement

“Regularly checking and replacing your key fob battery can prevent unexpected lockouts and keep your Durango’s security system functioning optimally,” advises automotive electronics specialist, Maria Sanchez.

Conclusion

Changing the battery in your Dodge Durango key fob is a simple task that anyone can perform with the right tools and a little guidance. By following these steps, you can save yourself a trip to the dealership and ensure your key fob is always ready when you need it. Remember to always have a spare CR2032 battery on hand for those unexpected moments. Want to know more about changing your Dodge key fob battery? Learn more about changing battery on dodge key fob. This resource has valuable insights and helpful tips. For older models, checking out 2013 durango key fob battery replacement can offer model-specific guidance.

FAQ

1. How often should I change my Dodge Durango key fob battery? Typically every 2-3 years.
2. What kind of battery does my Dodge Durango key fob use? Most likely a CR2032.
3. What if my key fob still doesn’t work after changing the battery? It might need to be reprogrammed.
4. Where can I buy a replacement battery? Most pharmacies, electronics stores, and grocery stores carry them.
5. Can I damage my key fob by changing the battery myself? It’s possible if you’re not careful. Gentle prying is key.
6. What tools do I need to change the battery? A small flathead screwdriver and a new CR2032 battery.
7. Is there a way to test my key fob battery before replacing it? Yes, some methods involve checking the range of the fob or using a multimeter.

Common Scenarios and Questions

• Scenario: Key fob works intermittently. Question: Could this be a battery issue? Answer: Yes, a weak battery often causes intermittent function.
• Scenario: Key fob doesn’t work at all. Question: Is the battery always the problem? Answer: Not always. It could be a programming issue or a faulty fob.
• Scenario: Key fob range is reduced. Question: What could be causing this? Answer: A dying battery is a likely culprit.

More Helpful Resources

• Key Fob Programming and Diagnostics
• Understanding Your Dodge Durango’s Security System

For assistance, contact us via WhatsApp: +1 (641) 206-8880 or visit our location at 1326 N Houston St, Amarillo, TX 79107, USA. We have 24/7 customer support.