How to Change Battery in Key Fob 2019 Chevy Traverse

Changing the battery in your 2019 Chevy Traverse key fob is a quick and easy process that can save you time and money. This guide will walk you through the steps involved, so you can get back on the road in no time. Whether you’re a car owner, a mechanic, or an automotive technician, understanding this simple procedure can be incredibly beneficial.

Understanding Your Chevy Traverse Key Fob

The key fob for your 2019 Chevy Traverse is a sophisticated piece of technology, responsible for locking and unlocking your doors, starting your engine, and even activating the panic alarm. Over time, the battery powering this device will inevitably deplete, requiring a replacement. Recognizing the signs of a dying key fob battery, like a decreased operating range or unresponsive buttons, can prevent unexpected lockouts.

Gathering Your Supplies for the Battery Change

Before you begin, gather the necessary tools. You’ll need a small flathead screwdriver or a similar tool to pry open the key fob, and of course, a new CR2032 battery. These batteries are readily available at most stores that sell electronics.

Step-by-Step Guide to Changing the Battery

Release the Key: Locate the small release button on the side of the key fob. Press this button and slide the metal key out of the fob.
Open the Fob: Insert the flathead screwdriver into the slot where the key was located. Gently twist the screwdriver to separate the two halves of the key fob casing. Be careful not to apply excessive force, as this may damage the plastic.
Remove the Old Battery: Once the fob is open, you’ll see the CR2032 battery. Carefully pry the old battery out using your screwdriver. Again, avoid using too much force.
Insert the New Battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side is facing upwards.
Close the Fob: Align the two halves of the key fob casing and press them together firmly until they snap shut.
Reinsert the Key: Slide the metal key back into its slot on the key fob.

Testing Your New Key Fob Battery

After replacing the battery, test all the functions of your key fob to ensure it’s working correctly. Try locking and unlocking the doors, starting the engine, and activating the panic alarm.

Troubleshooting Common Issues

Sometimes, even after replacing the battery, your key fob might not work. Here are a few things to check:

Battery Orientation: Ensure the battery is inserted correctly with the positive (+) side facing up.
Battery Contact: Make sure the battery is making good contact with the terminals inside the key fob.
Key Fob Programming: In rare cases, you might need to reprogram your key fob after changing the battery. Refer to your owner’s manual for specific instructions.

“A common mistake people make is inserting the battery upside down. Always double-check the orientation before closing the fob,” advises John Smith, Senior Automotive Technician at Smith Auto Repair.

How long does a Chevy Traverse key fob battery last?

Typically, a Chevy Traverse key fob battery lasts between 3 to 5 years.

Where can I buy a replacement battery for my Chevy Traverse key fob?

CR2032 batteries are readily available at most stores that sell electronics, such as pharmacies, supermarkets, and online retailers.

In conclusion, changing the battery in your 2019 Chevy Traverse key fob is a simple DIY task that takes only a few minutes. By following these simple steps, you can avoid the inconvenience and expense of a professional replacement.

FAQ

What type of battery does a 2019 Chevy Traverse key fob use? A CR2032 battery.
How often should I change my key fob battery? Every 3-5 years, or sooner if you notice issues.
Do I need any special tools to change the battery? A small flathead screwdriver or similar tool is recommended.
What should I do if my key fob still doesn’t work after replacing the battery? Double-check the battery orientation and contact, or consult your owner’s manual for reprogramming instructions.
Can I replace the key fob battery myself? Yes, it’s a simple DIY task.
Where can I find instructions for reprogramming my key fob? Your owner’s manual will have specific instructions for your vehicle.
What are the signs of a dying key fob battery? Decreased operating range, unresponsive buttons, or the need to be very close to the vehicle to lock/unlock.

Need help with other key fob issues? Check out our articles on programming key fobs and other common key fob problems.

Need assistance? Contact us via Whatsapp: +1 (641) 206-8880 Or visit our store at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team.