Changing your 2020 Subaru Forester key fob battery is a quick and easy process you can do yourself, saving you a trip to the dealership. This guide will walk you through the steps to replace the battery in your key fob, getting you back on the road with a fully functional key in no time. Learn about the right battery type, tools needed, and some troubleshooting tips if your key fob isn’t working. 2020 subaru forester key fob not working
What Battery Does My 2020 Subaru Forester Key Fob Need?
The 2020 Subaru Forester key fob uses a CR2032 battery, a common type found in many electronics. These are readily available at most stores that sell batteries. Make sure to pick up a fresh battery to ensure optimal key fob performance.
What Tools Do I Need to Change the Battery?
You’ll only need a small flathead screwdriver. Avoid using anything sharp that could damage the key fob or your fingers.
Step-by-Step Guide to Changing Your 2020 Subaru Forester Key Fob Battery
- Locate the release button: On the side of your key fob, you’ll find a small release button. Press this button to release the valet key.
- Use the valet key: Insert the tip of the valet key into the slot on the key fob casing, near where the key was released. Gently pry open the casing. Be careful not to force it.
- Remove the old battery: Once the casing is open, you’ll see the CR2032 battery. Carefully remove the old battery by gently prying it out with your flathead screwdriver. 2020 subaru forester key fob battery
- Insert the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side faces up.
- Close the casing: Snap the two halves of the key fob casing back together. Make sure it closes securely.
- Test the key fob: Try locking and unlocking your car to ensure the new battery is working correctly.
Troubleshooting Tips
If your key fob still isn’t working after replacing the battery, there could be other issues. Check subaru key fob range for potential solutions. How do you change a subaru key fob battery offers additional tips for various Subaru models.
“Sometimes, the issue isn’t the battery itself, but corrosion within the battery compartment,” says John Smith, Senior Automotive Technician at Smith’s Auto Repair. “Cleaning the contacts with a cotton swab and rubbing alcohol can often resolve the problem.”
Key Fob Battery Replacement Costs
While replacing the battery yourself is the most cost-effective option, understanding the typical costs associated with professional replacement can be helpful. Dealerships or locksmiths may charge anywhere from $5 to $25 for this simple procedure. Battery for subaru key fob 2020 provides further details on finding the correct battery.
Conclusion
Changing the key fob battery in your 2020 Subaru Forester is a straightforward task that anyone can accomplish with this simple guide. By following these steps, you can save time and money, and have your key fob working like new in minutes. Remember to always use a fresh CR2032 battery and be gentle when handling the key fob components.
Need assistance? Contact us via WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.
Leave a Reply