How to Charge a Subaru Key Fob

Knowing How To Charge A Subaru Key Fob can save you from the frustration of a dead key fob, especially when you’re in a hurry. While some Subaru key fobs have replaceable batteries, many newer models feature rechargeable batteries. This guide will cover both scenarios, offering clear instructions and troubleshooting advice to keep your Subaru key fob powered up. charge subaru key fob

Do All Subaru Key Fobs Need Charging?

Not all Subaru key fobs require charging. Older models typically use replaceable batteries. However, many newer Subarus utilize key fobs with internal rechargeable batteries. Identifying which type you have is the first step. Look for a small slot or port on the fob; if you find one, it’s likely rechargeable. If not, it probably uses a standard battery.

How Can I Tell if My Subaru Key Fob Battery is Low?

Several signs indicate a low key fob battery. Reduced operating range is a common symptom. You might find yourself needing to be much closer to the car to lock or unlock it. Another telltale sign is if the car’s response to the key fob becomes sluggish or intermittent. In some cases, the car might not respond at all. Also, be aware of any dashboard warning lights or messages related to the key fob.

Charging a Subaru Key Fob with a Rechargeable Battery

Charging a Subaru key fob with a rechargeable battery is straightforward. Most Subaru models offer two primary charging methods.

Method 1: In-Car Charging

1. Locate the key fob charging port inside your Subaru. This is typically a small, recessed slot, often found in the center console or near the gear shift.
2. Insert the key fob into the charging port. Ensure it’s securely seated.
3. The car should recognize the key fob and begin charging. Some models may display a charging indicator light.
4. Allow the key fob to charge fully. The charging time varies but usually takes around 30-60 minutes.

Method 2: Using a USB Cable

Some Subaru key fobs have a small access panel concealing a micro-USB port. subaru impreza 2009 key fob rechargeable battery If your key fob has this, you can charge it directly using a standard micro-USB cable and a USB power source, like a phone charger or your computer.

1. Open the access panel on the key fob to reveal the micro-USB port.
2. Connect the micro-USB cable to the key fob and the USB power source.
3. The key fob should begin charging.

Subaru Key Fob Charging Methods

Replacing the Battery in a Non-Rechargeable Subaru Key Fob

For older Subaru models with non-rechargeable key fobs, you’ll need to replace the battery. subaru outback key fob charger This usually involves using a small flathead screwdriver to pry open the fob casing.

1. Identify the correct battery type for your key fob. This is usually a CR2032 or similar. You can find this information in your owner’s manual.
2. Carefully pry open the key fob casing using a small flathead screwdriver. Be gentle to avoid damaging the internal components.
3. Locate and remove the old battery.
4. Insert the new battery, ensuring the positive (+) side faces the correct direction.
5. Snap the key fob casing back together.

Troubleshooting Subaru Key Fob Charging Issues

Sometimes, you might encounter problems charging your Subaru key fob. Here are some common issues and solutions:

• Key Fob Not Charging in Car: Try a different charging port in your vehicle. Ensure the key fob is fully inserted. Check your owner’s manual to confirm the correct charging procedure for your specific model.
• Key Fob Not Charging via USB: Try a different USB cable and power source. Ensure the micro-USB port on the key fob is clean and free of debris.
• Key Fob Still Not Working After Charging: The key fob itself might be faulty. subaru 2018 key fob replacement cost Contact your Subaru dealer or a qualified automotive locksmith for assistance. 2015 subaru outback key fob replacement

Conclusion: Keeping Your Subaru Key Fob Powered Up

Knowing how to charge a Subaru key fob is essential for any Subaru owner. By following the steps outlined in this guide, you can keep your key fob charged and avoid the inconvenience of a dead battery. Regular maintenance and prompt troubleshooting can ensure your Subaru key fob functions reliably for years to come.

FAQ

1. How long does a Subaru key fob battery last? The lifespan of a Subaru key fob battery varies depending on usage and model. Rechargeable batteries typically last 2-3 years. Replaceable batteries often last 3-5 years.

2. Can I jumpstart my Subaru with a dead key fob? You can typically still start your Subaru even with a dead key fob by using the physical key to unlock the door and then using the key fob’s hidden key blade to start the car. This might require touching the key fob to the start button.

3. What type of battery does my Subaru key fob use? Check your Subaru owner’s manual for the exact battery type.

4. Can I replace the battery in my rechargeable Subaru key fob? While technically possible, it’s not recommended to attempt replacing the battery in a rechargeable key fob yourself.

5. Where can I get a replacement Subaru key fob? You can obtain a replacement key fob from your Subaru dealership or a qualified automotive locksmith.

6. Why is my Subaru key fob not working even after charging? The key fob might be faulty, or there could be an issue with the car’s keyless entry system. Contact your Subaru dealer or an automotive locksmith for diagnostics.

7. How often should I charge my Subaru key fob? You don’t need to charge your key fob regularly like a phone. Charge it when you notice signs of a low battery, or if you haven’t used the car for an extended period.

Common Subaru Key Fob Problems and Solutions

Explore More Key Fob Topics

• How to program a Subaru key fob
• Understanding Subaru keyless entry systems
• Subaru key fob battery replacement costs

Need assistance with your Subaru key fob? Contact us via Whatsapp: +1 (641) 206-8880 Or visit our location at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team ready to help.