How to Open a 2020 Subaru Key Fob

If you’re searching for instructions on “How To Open 2020 Subaru Key Fob,” chances are you need to replace a dead battery or want to access the physical key inside. This guide will walk you through the process step-by-step and provide helpful tips along the way.

While key fobs have made our lives significantly easier, they can be a bit of a mystery when they stop working or need some attention. Fear not, accessing your 2020 Subaru key fob is a straightforward process. Let’s get started.

Identifying Your 2020 Subaru Key Fob Type

Before diving into the opening process, it’s essential to identify the type of key fob your 2020 Subaru uses. There are two main types:

Standard Key Fob: This is the most common type, featuring a physical key blade that folds out from the fob.
Keyless Access System (Keyless Entry and Start): This advanced system often lacks a visible key blade and relies on proximity sensors for unlocking and starting the car.

For this guide, we’ll focus on opening the standard key fob with a physical key blade, as that’s the most relevant for replacing batteries and accessing the emergency key.

How to Open Your 2020 Subaru Key Fob

Tools You’ll Need:

Small flathead screwdriver
Fingernail or a thin, sturdy object (optional)

Steps:

Locate the Release Button: Examine your Subaru key fob carefully. You’ll find a small release button or switch, usually located on the back or side. It’s often marked with an icon resembling an unlocked padlock or key.
Press and Hold the Release Button: Using your fingernail or the flathead screwdriver, gently press and hold the release button.
Slide Out the Key Blade: While holding the release button, gently slide or pull the physical key blade out of the fob. It should come out smoothly. If you feel resistance, ensure you’re pressing the release button completely.

Replacing the Battery in Your 2020 Subaru Key Fob

Once you’ve successfully opened your key fob, replacing the battery is a simple task.

Identify the Battery Type: Open the key fob casing. The battery type (usually a CR2032 or similar) will be printed on the battery itself.
Remove the Old Battery: Carefully pry out the old battery using the flathead screwdriver or your fingernail. Avoid using excessive force to prevent damage.
Insert the New Battery: Insert the new battery, ensuring the positive (+) side faces up, matching the orientation of the old battery.
Reassemble the Key Fob: Align the two halves of the key fob casing and press them together until you hear a click, indicating they’re securely closed.

Common Issues and Troubleshooting

Key Fob Won’t Open: Ensure you’re pressing the correct release button and holding it down completely while sliding the key blade out. If it’s stuck, try using a lubricant like WD-40 on the key blade’s hinge.
Key Fob Not Working After Battery Replacement: Double-check that you’ve inserted the new battery correctly with the positive (+) side facing up. If the issue persists, your key fob might need to be reprogrammed. Consult your Subaru owner’s manual or a dealership for instructions.

Conclusion

Knowing how to open your 2020 Subaru key fob is a valuable skill for every car owner. Whether it’s for replacing a dead battery or accessing the physical key, the process is simple and can save you time and hassle.

Remember to keep these instructions handy and refer to them whenever you need to access the inner workings of your Subaru key fob.

For more detailed instructions on replacing your Subaru key fob battery, visit our guide on replace 2020 subaru key fob battery.

FAQs

Q: How often should I replace my Subaru key fob battery?

A: It’s generally recommended to replace your key fob battery every 2-3 years, or sooner if you notice a decrease in its range.

Q: Can I replace the Subaru key fob battery myself, or do I need to go to a dealership?

A: Replacing the battery is a simple DIY task you can do at home with a few basic tools.

Q: What type of battery does my 2020 Subaru key fob use?

A: Most 2020 Subaru key fobs use a CR2032 battery, but it’s always best to check the existing battery for confirmation.

Q: My key fob isn’t working after replacing the battery. What should I do?

A: Ensure the battery is inserted correctly and try reprogramming the key fob. If the problem continues, consult your Subaru owner’s manual or a dealership for assistance.

Need Further Assistance?

For any questions or concerns regarding your Subaru key fob, please don’t hesitate to contact our expert team.

Contact us via WhatsApp: +1 (641) 206-8880

Visit our location: 1326 N Houston St, Amarillo, TX 79107, USA

Our dedicated customer support team is available 24/7 to assist you. You can also browse our website for additional resources and helpful guides on various car key and key fob-related topics.