How to Remove Battery From Subaru Key Fob

Knowing How To Remove Battery From Subaru Key Fob is essential for any Subaru owner. A dead key fob battery can leave you stranded, so understanding this simple process can save you time, money, and frustration. This guide provides a step-by-step walkthrough for various Subaru key fob models, troubleshooting tips, and answers to frequently asked questions.

Locating the Battery Compartment on Your Subaru Key Fob

Different Subaru models have slightly different key fob designs. 2015 subaru impreza key fob battery replacement might differ slightly from a subaru forester 2003 key fob. However, the basic principles remain the same. Most Subaru key fobs have a small release button or notch. Look closely at the edges of your key fob. You’ll usually find it on the side or back.

Steps to Remove the Subaru Key Fob Battery

Once you’ve located the release button or notch, follow these steps:

Press the Release Button: Using your fingernail or a small flat-head screwdriver, gently press the release button.
Separate the Key Fob Halves: While pressing the release button, carefully separate the two halves of the key fob. They should come apart easily.
Locate the Battery: The battery is usually housed in a small compartment within the key fob.
Remove the Old Battery: Gently pry the old battery out using your fingernail or a small flat-head screwdriver. Pay attention to the battery orientation.
Install the New Battery: Insert the new battery, making sure it’s positioned correctly, matching the orientation of the old battery.
Reassemble the Key Fob: Align the two halves of the key fob and press them together until they snap shut.

Installing the New Battery in a Subaru Key Fob

Troubleshooting Common Issues

Sometimes, you might encounter a few hiccups. Here are some common problems and solutions:

Key Fob Still Not Working: Double-check the battery orientation. Even a slightly incorrect placement can prevent the key fob from functioning.
Difficult to Separate Key Fob Halves: If the key fob halves are stuck, try using a slightly larger flat-head screwdriver, but be careful not to damage the plastic. If you have a 2012 subaru legacy key fob it might have a different mechanism.
Can’t Find the Release Button: Refer to your Subaru owner’s manual for specific instructions for your model.

What type of battery does a Subaru key fob use?

Most Subaru key fobs use a CR2032 3V lithium battery. This is a common battery type readily available at most stores.

Why is my Subaru key fob not working after battery replacement?

If your key fob still isn’t working after replacing the battery, there might be other issues. Try reprogramming the key fob, or if you need to change battery subaru key fob 2021, consult the manual for specific procedures.

Conclusion

Knowing how to remove battery from Subaru key fob is a simple yet crucial skill for every Subaru owner. This guide provides a straightforward process, along with troubleshooting tips and frequently asked questions, to empower you to handle this task with confidence.

FAQ

How often should I replace my Subaru key fob battery? Every 2-3 years, or when you notice the key fob’s range decreasing.
Can I use any brand of CR2032 battery? Yes, most brands of CR2032 batteries will work.
What if I damage my key fob while trying to remove the battery? Contact a Subaru dealership or a qualified automotive locksmith. You might find information on subaru tribeca key fob battery replacement.
Can I replace the battery myself, or do I need a professional? Replacing the battery is a simple DIY task.
Where can I buy a replacement CR2032 battery? Most electronics stores, pharmacies, and online retailers sell CR2032 batteries.
How do I know if my key fob battery is low? The key fob’s range might decrease, or you might need to press the buttons multiple times.
My key fob is still not working after replacing the battery. What should I do? Try reprogramming the key fob, consult your owner’s manual, or contact a Subaru dealership.