How to Replace Battery in 2010 Cadillac SRX Key Fob

Replacing the battery in your 2010 Cadillac SRX key fob is a quick and easy process that can save you time and money. This guide will walk you through the steps involved, so you can get back on the road in no time. Learn how to replace your Cadillac SRX key fob battery like a pro.

Identifying Your 2010 Cadillac SRX Key Fob

Before you begin, it’s important to confirm that you have the correct key fob. The 2010 Cadillac SRX typically uses a flip-key fob. This means the key blade folds out from the fob. If your key fob looks different, you may need to consult your owner’s manual or a cadillac srx key fob specialist for specific instructions.

Gathering Your Tools

You’ll need just a few simple tools for this task:

A small flathead screwdriver or a similar tool for prying.
A fresh CR2032 battery. These are readily available at most stores that sell batteries.

Step-by-Step Guide to Replacing the Battery in Your 2010 Cadillac SRX Key Fob

Here’s a detailed, step-by-step guide to help you replace the battery:

Locate the release button: On the side of the key fob, you’ll find a small release button. Press this button to release the key blade.
Separate the key fob halves: Using the flathead screwdriver, gently pry open the key fob casing along the seam. Start at the point where the key blade was released. Be careful not to damage the plastic.
Remove the old battery: Once the fob is open, you’ll see the CR2032 battery. Carefully pry it out using your flathead screwdriver.
Insert the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side is facing up.
Reassemble the key fob: Align the two halves of the key fob and press them together until they snap shut.
Test the key fob: Try locking and unlocking your car to ensure the new battery is working correctly. If it’s not, double-check that the battery is properly installed and the positive side is facing up.

Troubleshooting

Key fob still not working? Try a different battery. Sometimes new batteries can be faulty. If that doesn’t work, the issue may be with the key fob itself, and you may need to consider replacing it or having it reprogrammed. Check our guide on cadillac srx reprogram key fob.

Common Mistakes to Avoid

Using the wrong type of battery: Make sure you are using a CR2032 battery. Using the wrong battery can damage your key fob.
Forcing the key fob open: Be gentle when prying open the casing to avoid breaking any plastic tabs.

Conclusion

Replacing the battery in your 2010 Cadillac SRX key fob is a straightforward task. With the right tools and a little patience, you can save yourself a trip to the dealership. Remember to use a CR2032 battery and be careful not to damage the key fob during the process. Now that you know How To Replace Battery In 2010 Cadillac Srx Key Fob, you can keep your car secure and accessible. You can also find information about key fob battery for cadillac srx.

FAQs

How often should I replace my key fob battery? Typically, a key fob battery lasts between 3-5 years.
What type of battery does a 2010 Cadillac SRX key fob use? A CR2032 battery.
Can I replace the battery myself? Yes, it’s a simple process that most people can do at home.
What if my key fob still doesn’t work after replacing the battery? Try a different battery. If that doesn’t work, the key fob itself may be faulty. Check if you can start your car with the fob, see instructions how to start cadillac srx with key fob. Consider getting a new cadillac key fob case if yours is damaged.
Where can I buy a replacement CR2032 battery? Most stores that sell batteries, including drugstores, supermarkets, and electronics stores.
What should I do with the old battery? Dispose of the old battery properly. Most stores that sell batteries also have battery recycling programs.

Need further support? Contact us via Whatsapp: +1 (641) 206-8880
Or visit us at: 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team.