How to Replace Battery in 2013 Cadillac SRX Key Fob

Replacing the battery in your 2013 Cadillac SRX key fob is a quick and easy process that can be done at home with just a few tools. This guide will walk you through each step, ensuring you’re back on the road with a functioning key fob in no time.

If your 2013 Cadillac SRX key fob is acting up, a dead battery is often the culprit. Symptoms might include reduced range, intermittent operation, or the fob not working at all. Thankfully, you don’t need a trip to the dealership to fix this. You can save time and money by replacing the battery yourself. This simple DIY task will have your key fob working like new again. Is your Cadillac SRX key fob not working? This might be your solution!

Understanding Your 2013 Cadillac SRX Key Fob

The 2013 Cadillac SRX key fob is a sophisticated piece of technology, integrating several functions like remote locking/unlocking, panic alarm, and remote start. Its power source, a small CR2032 battery, is readily available at most stores. Before beginning the battery replacement, gather a small flat-head screwdriver and a fresh CR2032 battery. Knowing how to perform this simple maintenance task can prevent unexpected lockouts and keep your SRX accessible. Have you ever wondered if Cadillac fob keys interchangeable?

Knowing where the release button is on your Cadillac SRX key fob is the first step.

Step-by-Step Guide: How to Replace Battery in 2013 Cadillac SRX Key Fob

Locate the Release Button: On the side of your key fob, you’ll find a small release button. This button releases the metal key blade.
Release the Key Blade: Press the release button and gently slide the metal key blade out of the fob.
Open the Fob: Using the tip of your flat-head screwdriver, carefully pry open the key fob casing along the seam where the metal key was located. Be gentle to avoid damaging the plastic.
Remove the Old Battery: Inside the fob, you’ll see the CR2032 battery. Use your screwdriver to gently pry the old battery out of its compartment.
Install the New Battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side faces upwards.
Close the Fob: Align the two halves of the fob and press them together firmly until they snap shut.
Reinsert the Key Blade: Slide the metal key blade back into its slot. It should click into place.

Now, your Cadillac SRX key fob should be functioning correctly. Test all the buttons to ensure they work. If you’re still experiencing issues, it might be time for a new key fob. For more information about Cadillac key fobs, check out our guide on the 2013 Cadillac SRX key fob. If you’ve ever locked your Cadillac SRX key fob in the car, we have a solution for that too.

What type of battery does a 2013 Cadillac SRX key fob use?

A 2013 Cadillac SRX key fob uses a CR2032 battery.

How often should I replace the battery in my Cadillac SRX key fob?

Generally, a Cadillac SRX key fob battery lasts between 2-3 years.

Troubleshooting Your Cadillac SRX Key Fob

Sometimes, even after replacing the battery, your key fob might not work. This could be due to other issues, like a faulty key fob or a problem with your vehicle’s receiver. If this happens, consider these options: trying a spare key fob, checking the owner’s manual, or consulting a qualified automotive locksmith. Here’s another helpful resource on 2013 Cadillac ATS key fob replacement.

For information on other Cadillac models, you can explore our resource on Cadillac fob keys interchangeable.

Conclusion: Maintaining Your 2013 Cadillac SRX Key Fob

Replacing the battery in your 2013 Cadillac SRX key fob is a simple and cost-effective maintenance task that can save you time and hassle. By following these steps, you can keep your key fob working optimally and avoid unexpected lockouts. Remember to always keep a spare CR2032 battery on hand for quick replacements. And if your key fob isn’t working after a battery change, don’t hesitate to seek professional assistance.

FAQ

Where can I buy a CR2032 battery? Most pharmacies, supermarkets, and electronics stores carry CR2032 batteries.
What tools do I need to replace the battery? A small flat-head screwdriver is usually sufficient.
Can I damage my key fob during the process? While possible, damage is unlikely if you are careful.
What if my key fob still doesn’t work after replacing the battery? You may need a new key fob, or there could be an issue with your vehicle’s receiver. Consult a professional.
How long does it take to replace the battery? The entire process typically takes only a few minutes.
Is there a way to test my key fob to see if it is working? Yes, you can test the buttons to see if they lock/unlock the car doors, activate the panic alarm, or start the engine remotely.
What should I do with the old battery? Dispose of the old battery properly at a designated battery recycling location.

Need help with your Cadillac SRX key fob? Contact us via WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team. We also have a useful guide if you are experiencing a Cadillac SRX key fob not working.