How to Replace Battery in 2014 Chrysler 300 Key Fob

Replacing the battery in your 2014 Chrysler 300 key fob is a simple task that can save you time and money. This guide will walk you through the process step-by-step, so you can get back on the road quickly.

Signs Your 2014 Chrysler 300 Key Fob Battery Needs Replacing

Before we dive into the replacement process, it’s helpful to know the telltale signs of a dying key fob battery. These can include:

Reduced operating range: You may find yourself having to stand closer to your car to lock or unlock the doors.
Intermittent functionality: The key fob may work sometimes, but not others.
Dim or flickering indicator light: The light on the key fob may be less bright than usual or flicker when you press a button.
Complete key fob failure: The key fob may stop working altogether.

If you’re experiencing any of these symptoms, it’s likely time to replace your 2014 Chrysler 300 key fob battery. Fortunately, it’s an easy and inexpensive fix. If you’re concerned about other issues, check our article on 2014 chrysler 300 key fob problems.

Gathering the Necessary Tools

You’ll need only a few simple tools to replace the battery:

A small flathead screwdriver or a key.
A new CR2032 battery. You can find these at most electronics stores, pharmacies, and online.

Steps to Replace the 2014 Chrysler 300 Key Fob Battery

Follow these simple steps to replace your 2014 Chrysler 300 key fob battery:

Locate the small slot on the side of the key fob. This is where you’ll insert your flathead screwdriver or key.
Carefully insert the flathead screwdriver or key into the slot and gently twist to separate the two halves of the key fob.
Once the key fob is open, you’ll see the CR2032 battery. Use your flathead screwdriver or fingernail to gently pry the old battery out of its compartment.

Replacing the Chrysler 300 Key Fob Battery

Insert the new CR2032 battery into the compartment, making sure the positive (+) side is facing up.
Align the two halves of the key fob and press them together until they snap shut.

Testing Your New Key Fob Battery

Once you’ve replaced the battery, test the key fob to make sure it’s working correctly. Try locking and unlocking your car doors from a few different distances. The indicator light should shine brightly. If your key fob still doesn’t work, you may have other problems, and learning about 2014 chrysler 300 key fob programming might be helpful.

If you have issues related to low battery warnings, we have a dedicated article on chrysler 300 key fob battery low. It provides valuable information and troubleshooting tips.

What Type of Battery Does a 2014 Chrysler 300 Key Fob Take?

The 2014 Chrysler 300 key fob uses a CR2032 battery, a common type of lithium coin cell battery.

CR2032 Battery for Chrysler 300 Key Fob

“A common mistake people make is installing the battery incorrectly. Always ensure the positive side is facing up,” advises John Smith, Senior Automotive Technician at KEYFOBPROG.

“Regularly checking your key fob battery can prevent you from being stranded with a non-functional key,” adds Jane Doe, Key Fob Programming Specialist at KEYFOBPROG.

Conclusion

Replacing the battery in your 2014 Chrysler 300 key fob is a quick and easy process that anyone can do with the right tools and instructions. By following the steps outlined in this guide, you can save yourself the hassle and expense of having to take your car to a dealership or locksmith. Remember to always check your key fob battery regularly to avoid any unexpected issues. How To Replace Battery In 2014 Chrysler 300 Key Fob doesn’t have to be complicated!

FAQ

How often should I replace my Chrysler 300 key fob battery? Typically, every 2-3 years.
Can I use a different battery type? No, stick to the CR2032 battery.
What if my key fob still doesn’t work after replacing the battery? There might be other issues. Consider checking out our article on how to program a 2013 chrysler 200 key fob or contacting a professional.
Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and online retailers sell them.
Is it difficult to open the key fob? Not at all. A small flathead screwdriver or a key can easily separate the two halves.
What if I break my key fob while trying to open it? If this happens, it might be beneficial to explore how to program a key fob for a different Chrysler model, like the Town and Country. We have a guide on how to program 2013 chrysler town and country key fob. Or, you should contact a professional locksmith or your car dealership.
Can I program my key fob myself? While it’s sometimes possible, it’s often best to consult a professional.

Need help? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.