How to Replace Battery in 2014 Subaru Key Fob

Knowing How To Replace Battery In 2014 Subaru Key Fob can save you time and money. A dead key fob battery can leave you stranded, so understanding this simple process is crucial for any 2014 Subaru owner. This guide provides a step-by-step walkthrough, addressing common issues and offering expert advice.

Locating the Key Fob Battery Compartment

The first step in replacing your 2014 Subaru key fob battery is locating the battery compartment. Most 2014 Subaru models have a small release button or switch on the side of the fob. This button releases the physical key, which you’ll need to pry open the fob casing. Some models might have a slightly different design, so if you can’t locate the release button, refer to your owner’s manual. If you’re having trouble with your Subaru key fob altogether, consider these troubleshooting resources: subaru key fob won’t work. You can also learn more about how to replace the battery in a similar model here: 2014 subaru crosstrek key fob battery replacement.

Step-by-Step Battery Replacement Guide

1. Remove the physical key: Press the release button and slide the key out of the fob.
2. Open the fob casing: Carefully insert the tip of the flathead screwdriver into the slot where the key was located. Gently pry the two halves of the fob apart. Avoid using excessive force, which could damage the casing.
3. Identify the battery: Inside, you’ll find a small, round CR2032 battery.
4. Remove the old battery: Gently pry the old battery out using your flathead screwdriver. Be careful not to damage the battery contacts.
5. Insert the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side faces up, just as the old battery was positioned.
6. Close the fob casing: Align the two halves of the fob and press them firmly together until they snap shut.
7. Test the key fob: Try locking and unlocking your car to ensure the new battery is working correctly.

What Type of Battery Does a 2014 Subaru Key Fob Use?

A 2014 Subaru key fob uses a CR2032 battery, a common type readily available at most stores.

How Long Does a Subaru Key Fob Battery Last?

Typically, a Subaru key fob battery lasts between two to three years, depending on usage.

“A common mistake is inserting the battery incorrectly,” says John Miller, a certified automotive technician. “Always double-check the polarity before closing the fob.”

Why is My Subaru Key Fob Not Working After Battery Replacement?

Sometimes, even after replacing the battery, your key fob might not work. This could be due to a few reasons, such as a faulty battery, corroded terminals, or a damaged fob. If your key fob isn’t working, check our guide on how to reconnect my key fob to my subaru. You might need to reprogram your key fob, which often requires specialized equipment. If your Subaru is a Crosstrek Hybrid, you can find specific information about battery replacement for this model here: 2014 subaru crosstrek hybrid key fob battery replacement. For those considering a replacement key fob, you might find this resource helpful: subaru brz key fob replacement.

Conclusion

Replacing the battery in your 2014 Subaru key fob is a straightforward process that can be done at home with minimal tools. Following these steps will help ensure you’re never caught off guard by a dead key fob battery. Remember to have a spare CR2032 battery on hand, and if you encounter any issues, don’t hesitate to seek professional assistance.

FAQ

1. What type of battery does my 2014 Subaru key fob use? A CR2032 battery.
2. Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and online retailers.
3. How often should I replace my key fob battery? Every 2-3 years, or sooner if you notice decreased range.
4. What tools do I need to replace the battery? A small flathead screwdriver or similar prying tool.
5. What if my key fob still doesn’t work after replacing the battery? You might need to reprogram the key fob or have it checked by a professional.
6. Can I damage my key fob by replacing the battery myself? It’s possible to damage the casing if you use excessive force. Be gentle.
7. Is there a way to test my key fob battery without replacing it? Not easily, but diminished range is a good indicator of a low battery.

Common Scenarios

• Key fob works intermittently: This often indicates a dying battery.
• Key fob doesn’t work at all: Could be a dead battery, faulty fob, or programming issue.
• Key fob only works close to the car: Likely a low battery.

Further Assistance

For more information on Key Fob Programming and other automotive key services, visit our website or contact us via WhatsApp: +1 (641) 206-8880. You can also visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team ready to assist you.