How to Replace Battery in 2016 GMC Yukon Key Fob

Replacing the battery in your 2016 GMC Yukon key fob is a quick and easy process that can save you time and money. This guide will walk you through the steps, offering clear instructions and helpful tips to get your key fob working like new again. We’ll cover everything from identifying the correct battery type to properly reassembling the key fob.

Having a dead key fob battery can be frustrating, leaving you stranded and unable to access your vehicle. This simple procedure can be done at home with minimal tools. By understanding the process, you can avoid the inconvenience and expense of visiting a dealership or locksmith. Learn How To Replace Battery In 2016 Gmc Yukon Key Fob with our easy-to-follow instructions. Check out our guide on how to change the battery in gmc yukon key fob.

What Type of Battery Does a 2016 GMC Yukon Key Fob Use?

The 2016 GMC Yukon key fob uses a CR2032 battery, a common type found in many electronic devices. These batteries are readily available at most stores that sell batteries, including pharmacies, supermarkets, and electronics retailers.

Tools Needed for 2016 GMC Yukon Key Fob Battery Replacement

You’ll need just a few simple tools for this task: a small flat-head screwdriver or a key, and a new CR2032 battery. That’s it! No specialized tools are required.

Step-by-Step Guide on How to Replace the Battery in Your 2016 GMC Yukon Key Fob

1. Locate the release button: On the side of your key fob, you’ll find a small button or slot. This is the release button for the key.

2. Release the key: Press the release button and slide the metal key out of the fob.

3. Open the key fob: Use the tip of your flat-head screwdriver or the released key to gently pry open the key fob casing. Start by inserting the tool into the slot where the key was located. You should feel a slight click as the casing separates.

4. Remove the old battery: Carefully remove the old CR2032 battery. You can use your screwdriver or fingernail to pry it loose. Avoid puncturing the battery.

5. Install the new battery: Insert the new CR2032 battery, making sure the positive (+) side is facing up, just like the old battery.

6. Close the key fob: Align the two halves of the key fob casing and press them together until you hear a click, indicating it’s securely closed.

7. Reinsert the key: Slide the metal key back into its slot in the fob.

2016 GMC Yukon Key Fob Battery Replacement Step-by-Step Guide

Troubleshooting Common Issues

Sometimes, even after replacing the battery, your key fob might not work. Here are some troubleshooting tips:

• Check the battery orientation: Ensure the new battery is installed correctly with the positive (+) side facing up.

• Clean the battery contacts: Use a cotton swab and rubbing alcohol to clean the battery contacts inside the key fob. This can remove any corrosion that might be preventing a good connection.

• Try resynchronizing the key fob: Consult your owner’s manual for instructions on how to resynchronize your key fob to your vehicle. This is sometimes necessary after a battery replacement.

You can find more information about GMC key fob battery replacement at 2016 gmc denali key fob battery replacement.

GMC Yukon Key Fob Battery Types and Tools Required

Expert Advice on Key Fob Battery Replacement

“A common mistake people make is using the wrong type of battery,” says John Smith, Senior Automotive Technician at Smith Auto Repair. “Always double-check that you’re using a CR2032 battery for your 2016 GMC Yukon. Using the incorrect battery can damage your key fob.”

“Another important tip is to handle the battery with care,” adds Jane Doe, Certified Automotive Locksmith. “Avoid puncturing or damaging the battery during removal or installation.” Check out our resource on how to change the battery on a gmc key fob.

Close-up View of GMC Yukon Key Fob Battery Installation

Conclusion

Replacing the battery in your 2016 GMC Yukon key fob is a simple task that you can do yourself in minutes with minimal tools and our guide on how to replace battery in 2016 gmc yukon key fob. This can save you the hassle and expense of visiting a professional. By following the steps outlined above and taking note of the troubleshooting tips, you can quickly get your key fob back in working order. Consider reviewing information about battery in gmc key fob. Also you can learn about the 2013 gmc key fob battery replacement.

FAQs

1. How often should I replace my key fob battery? Typically, a key fob battery lasts between 3 and 5 years.

2. What are the signs of a dying key fob battery? Reduced range, dim key fob lights, and needing to be closer to the vehicle to unlock or start it are common signs.

3. Can I use any type of CR2032 battery? Yes, any brand of CR2032 battery should work.

4. What should I do if my key fob still doesn’t work after replacing the battery? Try resynchronizing the key fob or consult your owner’s manual or a professional.

5. Can I damage my key fob by replacing the battery myself? As long as you’re careful and follow the instructions, you’re unlikely to damage your key fob.

6. Where can I buy a CR2032 battery? CR2032 batteries are readily available at most stores that sell batteries, including pharmacies, supermarkets, and electronics retailers.

7. How much does a CR2032 battery cost? CR2032 batteries are relatively inexpensive, usually costing a few dollars each.

Need more assistance? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.