If you own a 2018 Jeep Renegade, chances are you’ve experienced the convenience of its keyless entry system. But like all electronics, the battery in your key fob won’t last forever. A dead key fob battery can leave you stranded, unable to unlock your doors or start your engine. Don’t worry though, replacing the battery in your 2018 Jeep Renegade key fob is a quick and easy process you can do yourself at home. This guide will walk you through each step, ensuring you get back on the road in no time.
What You’ll Need
Before you begin, gather the following items:
- A new CR2032 battery (widely available at most stores)
- A small flathead screwdriver or a plastic pry tool
Step-by-Step Guide
-
Locate the Key Slot: On the back of your 2018 Jeep Renegade key fob, you’ll find a small key slot.
-
Release the Emergency Key: Insert the tip of your flathead screwdriver or pry tool into the key slot and gently pry open the back cover of the key fob.
-
Separate the Key Fob Halves: Carefully separate the two halves of the key fob, revealing the battery compartment.
Opening the 2018 Jeep Renegade Key Fob -
Remove the Old Battery: Using your fingernail or the edge of the screwdriver, carefully lift the old CR2032 battery out of its compartment. Note the orientation of the positive (+) and negative (-) sides of the battery.
-
Install the New Battery: Insert the new CR2032 battery into the compartment, ensuring the positive (+) side is facing up, just like the old battery.
-
Reassemble the Key Fob: Align the two halves of the key fob and press them firmly together until you hear a click, indicating the cover is securely closed.
-
Test the Key Fob: Test all the buttons on your key fob (lock, unlock, panic) to make sure they are working properly. If not, double-check that the battery is correctly installed.
Replacing the Battery in a 2018 Jeep Renegade Key Fob
Still Having Trouble?
While replacing the battery in your 2018 Jeep Renegade key fob is generally straightforward, there may be instances where you encounter issues or require additional assistance. If you’ve followed these steps and your key fob still isn’t functioning correctly, it’s possible there’s another underlying issue. In such cases, it’s best to contact a professional automotive locksmith or your Jeep dealership for further diagnosis and support.
“It’s always best to err on the side of caution when dealing with your car’s electronics,” advises John Smith, a senior automotive locksmith at Keyfobprog. “While a simple battery replacement is often the solution, other factors could be at play. Don’t hesitate to seek professional help if needed.”
Keyfobprog is here to Help
Need help with your car key or remote programming? Contact Keyfobprog at +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We specialize in car key programming and replacement for all makes and models.
FAQ
1. How long does a Jeep Renegade key fob battery last?
Typically, a Jeep Renegade key fob battery can last anywhere from 3 to 5 years, depending on usage and environmental factors.
2. Can I use any CR2032 battery for my key fob?
While any brand of CR2032 battery will work, it’s recommended to use a reputable brand to ensure quality and longevity.
3. What if I replace the battery and my key fob still doesn’t work?
If replacing the battery doesn’t resolve the issue, there might be a problem with the key fob itself. Contact a qualified locksmith or dealership for assistance.
4. Can I drive my Jeep Renegade with a dead key fob battery?
Yes, you can usually start your Jeep Renegade with a dead key fob battery by using the physical key hidden inside the fob to manually unlock the door and then using the key fob to start the engine.
5. How can I prevent my key fob battery from draining quickly?
Avoid keeping your key fob near electronic devices that emit strong signals, as this can contribute to battery drain. Additionally, avoid frequently pressing the buttons unnecessarily.
Leave a Reply