Front and Back View of 2018 Hyundai Kona Key Fob

Hyundai Kona 2018 Key Fob Battery: Replacement and Programming Guide

Replacing the key fob battery in your 2018 Hyundai Kona is a simple process that can save you time and money. This guide provides a comprehensive walkthrough, covering everything from identifying the correct battery type to programming your key fob after replacement.

Understanding Your Hyundai Kona Key Fob

The 2018 Hyundai Kona key fob is a sophisticated piece of technology. It allows you to lock and unlock your car, start the engine remotely, and even activate the panic alarm. Like any electronic device, it relies on a battery to function. Over time, this battery will drain, and you’ll need to replace it. Recognizing the signs of a dying key fob battery is crucial to avoid unexpected lockouts. These signs can include diminished range, intermittent operation, or the need to press the buttons multiple times to get a response.

Front and Back View of 2018 Hyundai Kona Key FobFront and Back View of 2018 Hyundai Kona Key Fob

What Type of Battery Does a 2018 Hyundai Kona Key Fob Use?

The 2018 Hyundai Kona key fob uses a CR2032 battery, a common type found in many electronic devices. You can purchase these batteries at most electronics stores, pharmacies, and online retailers. Make sure to choose a reputable brand to ensure quality and longevity. Using a low-quality battery could lead to shorter battery life and potential malfunctions.

How to Replace the Hyundai Kona 2018 Key Fob Battery

Replacing the battery is straightforward and can be done at home with minimal tools. First, locate the small release button on the side of the key fob. Press this button to release the emergency key. Next, use the emergency key or a small flathead screwdriver to pry open the key fob casing. Carefully remove the old battery and replace it with a new CR2032 battery, ensuring the positive (+) side is facing up. Finally, snap the key fob casing back together and reinsert the emergency key.

Step-by-Step Guide for 2018 Hyundai Kona Key Fob Battery ReplacementStep-by-Step Guide for 2018 Hyundai Kona Key Fob Battery Replacement

Do I Need to Program the Key Fob After Replacing the Battery?

In most cases, you won’t need to reprogram your 2018 Hyundai Kona key fob after a simple battery replacement. The car should automatically recognize the key fob once the new battery is installed. However, if you experience any issues with the key fob functionality, you may need to perform a reprogramming procedure. This procedure usually involves a specific sequence of actions with the key fob and the car’s ignition. Consult your owner’s manual or contact a Hyundai dealership for specific instructions.

Troubleshooting Hyundai Kona 2018 Key Fob Issues

If your key fob still isn’t working after replacing the battery, there are several things you can try. First, double-check that you installed the new battery correctly, ensuring the positive (+) side is facing up. Next, try cleaning the battery contacts inside the key fob with a cotton swab and rubbing alcohol. If these steps don’t work, you may need to consult a professional locksmith or Hyundai dealership for further diagnosis and repair. They can diagnose more complex issues, such as a faulty key fob or issues with the car’s receiver.

How Long Does a Hyundai Kona Key Fob Battery Last?

Typically, a Hyundai Kona key fob battery lasts between 3 to 5 years, depending on usage. Factors such as frequency of use and environmental conditions can affect battery life. Replacing the battery preemptively every few years is a good practice to avoid unexpected issues. This proactive approach can save you from the inconvenience of a dead key fob.

Conclusion

Replacing your 2018 Hyundai Kona key fob battery is a quick and easy process that you can do yourself. By following the steps outlined in this guide, you can keep your key fob functioning properly and avoid frustrating lockouts. Remember to use a high-quality CR2032 battery and consult your owner’s manual or a professional if you encounter any issues.

FAQ

  1. What type of battery does the 2018 Hyundai Kona key fob use? A CR2032 battery.
  2. How do I open my 2018 Hyundai Kona key fob? Use the release button and the emergency key or a small flathead screwdriver.
  3. Do I need to program the key fob after replacing the battery? Usually not, but you might need to if you experience issues.
  4. Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and online retailers.
  5. How long does a Hyundai Kona key fob battery last? Typically 3-5 years.
  6. What should I do if my key fob still doesn’t work after replacing the battery? Check the battery orientation and clean the contacts, or consult a professional.
  7. Can I replace the Hyundai Kona key fob battery myself? Yes, it’s a simple process.

Need more help? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *