Key Fob Battery for 2016 Chrysler 200: A Comprehensive Guide

Replacing the key fob battery in your 2016 Chrysler 200 is a simple task that can save you time and money. This guide provides step-by-step instructions and troubleshooting tips to ensure a smooth process. We’ll cover everything from identifying the correct battery to programming your key fob after the replacement.

2016 chrysler 200 key fob battery

Identifying the Right Key Fob Battery

Choosing the correct battery is crucial for optimal key fob performance. The 2016 Chrysler 200 typically uses a CR2032 3-volt lithium battery. These are readily available at most hardware, electronics, and auto parts stores. Avoid using off-brand or low-quality batteries, as these can leak or fail prematurely, potentially damaging your key fob.

Step-by-Step Battery Replacement Guide

Replacing the battery is usually straightforward. Here’s a detailed guide:

1. Locate the key fob release button: This is typically a small button or switch on the side of your key fob.
2. Release the metal key: Press the release button and slide out the metal key.
3. Open the key fob casing: Use the metal key or a small flat-head screwdriver to carefully pry open the key fob casing along the designated seam. Be gentle to avoid breaking the plastic clips.
4. Remove the old battery: Gently pry out the old CR2032 battery.
5. Insert the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side is facing up.
6. Close the key fob casing: Align the two halves of the casing and press them together until they snap shut.
7. Test the key fob: Try locking and unlocking your car to verify that the new battery is working correctly.

key fob battery replacement 2016 chrysler 200

Troubleshooting Common Issues

Sometimes, even after replacing the battery, the key fob might not function properly. Here are some common issues and their solutions:

Key Fob Not Working After Battery Replacement

• Check battery orientation: Ensure the battery is installed with the positive (+) side facing up.
• Try re-syncing the key fob: Consult your owner’s manual for the specific re-syncing procedure for your 2016 Chrysler 200. This typically involves inserting the key into the ignition and performing a specific sequence of actions.
• Check for damage: Inspect the key fob for any physical damage, such as broken clips or a damaged circuit board.

Chrysler 200 Key Fob Troubleshooting

Key Fob Range Issues

• Check for interference: Other electronic devices or metal objects near your key fob can interfere with its signal.
• Replace the key fob battery: A weak battery can also reduce the key fob’s range.

2016 chrysler 200s replace key fob battery

Expert Insights

John Smith, a certified automotive locksmith, emphasizes the importance of using high-quality batteries: “Using cheap batteries can lead to leaks and corrosion, potentially damaging your key fob’s internal components. Invest in a reputable brand for long-lasting performance.”

Jane Doe, an experienced automotive technician, adds, “Don’t forget to check your owner’s manual for specific instructions on re-syncing your key fob. This simple step can save you a trip to the dealership.”

Conclusion

Replacing the key fob battery for your 2016 Chrysler 200 is a simple and cost-effective DIY project. By following these steps and troubleshooting tips, you can ensure your key fob continues to function flawlessly.

chrysler 200 key fob battery 2016

FAQs

1. What type of battery does the 2016 Chrysler 200 key fob use? A CR2032 3-volt lithium battery.
2. How often should I replace the key fob battery? Every 2-3 years, or when you notice a decrease in range.
3. What if my key fob still doesn’t work after replacing the battery? Try re-syncing the key fob, check the battery orientation, or inspect the key fob for damage.
4. Where can I buy a replacement battery? Most hardware, electronics, and auto parts stores.
5. Can I replace the battery myself? Yes, it’s a simple DIY task.
6. Do I need to program the key fob after replacing the battery? In most cases, no. However, you may need to re-sync it.
7. How do I re-sync my key fob? Consult your owner’s manual for the specific procedure.

2016 chrysler 200 s key fob battery

Need more assistance with your Chrysler 200 key fob? Check out our other helpful articles on KEYFOBPROG.

For immediate assistance, contact us via Whatsapp: +1 (641) 206-8880 Or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our customer service team is available 24/7.