Replacing the key fob battery in your 2018 Infiniti Q60 is a quick and easy process that can save you time and money. This guide will walk you through each step, from identifying the signs of a dying battery to successfully replacing it yourself, avoiding a trip to the dealership. Whether you’re a car owner, mechanic, or technician, this comprehensive guide will equip you with the knowledge to handle this simple yet crucial task for your 2018 Infiniti Q60.
Signs Your Key Fob Battery Needs Replacing
Knowing when your key fob battery is about to die can prevent inconvenient lockouts. Here are some common telltale signs:
- Decreased range: You might notice that you have to be much closer to your car for the key fob to work.
- Intermittent operation: The key fob might work sometimes and not others, leading to frustration.
- Dim or flickering indicator light: The small LED light on your key fob may become faint or stop working altogether.
- Slow response: The car may take longer than usual to respond to the key fob commands.
If you experience any of these symptoms, it’s highly likely your key fob battery needs to be replaced.
Infiniti Q60 Key Fob Range Issues
Gathering the Necessary Tools
Before you begin, make sure you have the right tools for the job. For a 2018 Infiniti Q60, you’ll typically need:
- A small flat-head screwdriver or a key fob opener tool.
- A new CR2032 battery. These are readily available at most electronics stores, pharmacies, and online.
Having these items ready will ensure a smooth and efficient battery replacement process.
Step-by-Step Key Fob Battery Replacement for 2018 Infiniti Q60
Follow these easy steps to replace the battery in your 2018 Infiniti Q60 key fob:
- Locate the release button: On the back of your key fob, you’ll find a small release button.
- Release the emergency key: Press the release button and slide out the emergency key.
- Open the key fob casing: Use the flat-head screwdriver or key fob opener tool to gently pry open the key fob casing at the seam where the emergency key was released. Be careful not to damage the casing.
- Remove the old battery: Once the casing is open, you’ll see the CR2032 battery. Carefully remove it using your screwdriver or tool.
- Install the new battery: Insert the new CR2032 battery, making sure the positive (+) side is facing up.
- Close the key fob casing: Snap the two halves of the key fob casing back together until you hear a click.
- Reinsert the emergency key: Slide the emergency key back into its slot.
Key Fob Programming: Do You Need It?
In most cases, you will not need to reprogram your key fob after replacing the battery in a 2018 Infiniti Q60. The car should automatically recognize the key fob once the new battery is installed. However, if you experience any issues, consult your owner’s manual or contact an Infiniti dealership.
Troubleshooting Tips for Key Fob Issues
If your key fob still isn’t working after replacing the battery, try these troubleshooting steps:
- Check the battery orientation: Ensure the new battery is installed correctly with the positive (+) side facing up.
- Try a different battery: Sometimes, a new battery may be faulty. Try replacing it with another fresh CR2032 battery.
- Inspect the key fob contacts: Check the metal contacts inside the key fob for any corrosion or dirt. Clean them with a cotton swab and rubbing alcohol if necessary.
Conclusion
Replacing the key fob battery in your 2018 Infiniti Q60 is a simple task that can be completed in minutes with just a few tools. By following this guide, you can save yourself the time and expense of a trip to the dealership. Remember to keep a spare CR2032 battery on hand so you’re always prepared. If you encounter any difficulties, don’t hesitate to consult your owner’s manual or contact a qualified technician. Regular key fob battery replacement ensures smooth and uninterrupted access to your vehicle.
FAQ
- How often should I replace my key fob battery? Every 2-3 years.
- What type of battery does my 2018 Infiniti Q60 key fob use? A CR2032 battery.
- Can I replace the key fob battery myself? Yes, it’s a simple process.
- Do I need to program the key fob after replacing the battery? Usually, no programming is needed.
- Where can I buy a CR2032 battery? At most electronics stores, pharmacies, and online.
- What if my key fob still doesn’t work after replacing the battery? Check the battery orientation, try a different battery, and inspect the key fob contacts.
- How do I open the key fob if I don’t have a screwdriver? You can use a coin or a similar thin object to pry it open carefully.
Need more help? Check out these related articles on KEYFOBPROG:
- Key Fob Programming for Infiniti Vehicles
- Common Key Fob Problems and Solutions
- Understanding Your Infiniti’s Keyless Entry System
Need expert assistance? Reach out to us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.
Leave a Reply