If you’re experiencing issues with your Mazda key fob, like decreased range or unresponsive buttons, a dead battery might be the culprit. The good news is that changing the Mazda key fob battery, particularly for the SKE130 model, is a simple DIY task. This guide will walk you through the process step-by-step, helping you get back on the road with a fully functional key fob in no time.
Identifying Your Mazda Key Fob Battery
Before you begin, it’s essential to confirm you have the correct replacement battery. The SKE130 Mazda key fob uses a CR2032 battery, a common type found at most electronics and automotive stores.
Identifying the Mazda Key Fob Battery
Gathering Your Tools
To change the battery, you’ll need just a few basic tools:
- Small flat-head screwdriver or a similar prying tool
- New CR2032 battery
Step-by-Step Mazda SKE130 Key Fob Battery Replacement
Follow these steps to replace your Mazda key fob battery:
- Locate the release button: On the back of the key fob, find the small, recessed button.
- Release the key: Press the release button and gently pull the metal key out from the fob.
- Open the battery compartment: Insert the flat-head screwdriver (or prying tool) into the notch on the side of the fob. Gently pry the back cover open.
- Remove the old battery: Carefully remove the old CR2032 battery. Note the positive (+) side facing up for proper installation of the new battery.
- Install the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side faces up, matching the orientation of the old battery.
- Close the fob: Align the back cover and press it firmly until you hear a click, indicating it’s securely closed.
- Reinsert the key: Slide the metal key back into the fob until it locks into place.
Testing Your Mazda Key Fob
After replacing the battery, test all key fob functions, including locking/unlocking doors and remote start (if equipped), to ensure it’s working correctly.
Troubleshooting Tips
If your Mazda key fob is still not working after replacing the battery, consider these troubleshooting steps:
- Check battery installation: Ensure the new battery is correctly installed with the positive (+) side facing up.
- Clean the battery contacts: Over time, battery contacts can accumulate dirt or corrosion. Clean them gently with a cotton swab and rubbing alcohol.
- Reprogram the key fob: In some cases, you may need to reprogram your key fob to your Mazda vehicle after a battery change. Refer to your owner’s manual for specific instructions.
Still Having Issues?
For expert assistance with your Mazda Key Fob Programming or any other automotive key-related needs, contact KEYFOBPROG. Our team of skilled technicians is here to help!
Need support? Contact us:
- Whatsapp: +1 (641) 206-8880
- Visit us: 1326 N Houston St, Amarillo, TX 79107, USA
We offer 24/7 customer support to assist you with any questions or concerns.
Leave a Reply