Replace Key Fob Battery 2019 Jeep Cherokee

Replacing the key fob battery in your 2019 Jeep Cherokee is a simple task that can save you time and money. A dead key fob can leave you stranded, so knowing how to quickly and easily replace the battery is essential. This guide will walk you through the process step-by-step.

If you’ve noticed your key fob isn’t working as reliably as it used to, the battery is likely the culprit. Common signs of a dying key fob battery include reduced range, intermittent functionality, or the need to press the buttons multiple times. Ignoring these signs could eventually lead to a complete key fob failure, leaving you locked out of your vehicle. This article aims to equip you with the knowledge to avoid such a scenario. Knowing how to replace the key fob battery in your 2019 Jeep Cherokee can empower you to maintain your vehicle’s functionality and avoid costly trips to a dealership or locksmith. For those experiencing similar issues with a different Jeep model, you might find the information on how to change battery in key fob Jeep Compass helpful.

You might be interested in reading more about 2019 jeep grand cherokee limited key fob battery.

What You’ll Need to Replace Your 2019 Jeep Cherokee Key Fob Battery

Before you begin, gather the necessary tools. You’ll need:

• A new CR2032 battery. These are readily available at most stores.
• A small flat-head screwdriver or a key. This will help you pry open the key fob.

Step-by-Step Guide to Replacing Your Key Fob Battery

1. Locate the release button: On the side of your key fob, you’ll find a small release button.
2. Press the release button: Press and hold this button while simultaneously sliding the metal key out of the fob.
3. Separate the key fob halves: Using your flat-head screwdriver or key, carefully pry open the key fob casing. Start at the seam where the metal key was inserted. Be gentle to avoid damaging the plastic.
4. Remove the old battery: Once the key fob is open, you should see the old CR2032 battery. Gently pry it out using your screwdriver or key.
5. Insert the new battery: Place the new CR2032 battery into the compartment, making sure the positive (+) side is facing up.
6. Reassemble the key fob: Carefully snap the two halves of the key fob back together.
7. Reinsert the metal key: Slide the metal key back into its slot.

Common Issues and Troubleshooting

Sometimes, you might encounter a few hiccups. If your key fob still isn’t working after replacing the battery, try these troubleshooting steps:

• Check the battery orientation: Make sure the new battery is inserted correctly with the positive (+) side facing up.
• Clean the battery contacts: Use a cotton swab and some rubbing alcohol to clean the battery contacts inside the key fob.
• Try a different battery: Occasionally, you might get a dud battery. Try a new one to rule this out.

If you’re still having trouble, you may want to refer to information on jeep cherokee key fob dies for more in-depth troubleshooting.

“Regularly checking and replacing your key fob battery is a small but important part of maintaining your vehicle,” says John Smith, Certified Automotive Technician at KEYFOBPROG. “It can save you from the inconvenience and expense of a lockout situation.”

Why is my Jeep Cherokee key fob not working after battery replacement?

Sometimes, even after a battery replacement, the key fob may not function correctly. This could be due to several factors, such as incorrect battery installation, corroded battery terminals, or even a faulty key fob itself.

“While replacing the key fob battery is usually straightforward, occasionally, there might be underlying issues that require professional attention,” adds Maria Garcia, Lead Technician at KEYFOBPROG.

If you’re experiencing consistent issues with your Jeep Grand Cherokee key fob, you might find this resource on key fob battery jeep grand cherokee valuable.

Replacing Your 2019 Jeep Cherokee Key Fob Battery: A Simple Solution for a Big Problem

Replacing the battery in your 2019 Jeep Cherokee key fob is a quick and easy process that can prevent frustrating lockouts and save you money. By following these simple steps, you can keep your key fob functioning properly and enjoy the convenience of keyless entry.

FAQ

1. What type of battery does the 2019 Jeep Cherokee key fob use? A CR2032 battery.
2. How often should I replace my key fob battery? Every 2-3 years, or when you notice signs of weakening.
3. Can I replace the battery myself? Yes, it’s a simple process.
4. What if my key fob still doesn’t work after replacing the battery? Check the battery orientation, clean the contacts, or try a different battery. If the problem persists, consult a professional.
5. Where can I buy a replacement battery? Most stores that sell batteries, including grocery stores, pharmacies, and auto parts stores.
6. How much does a replacement battery cost? A CR2032 battery typically costs a few dollars.
7. Can a dead key fob battery damage my car? No, a dead key fob battery won’t harm your car.

Check out our guide on jeep cherokee key fob battery replacement 2019 for more detailed instructions.

Need more assistance with your Jeep Cherokee key fob? Explore these related resources: How to program a Jeep Cherokee key fob, troubleshooting common key fob problems, and understanding keyless entry systems.

Need help? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our customer service team is available 24/7.