Replacing the Battery in a 2007 Subaru Key Fob

Replacing the battery in your 2007 Subaru key fob is a quick and easy process that can save you the hassle and expense of a trip to the dealership. This guide will walk you through each step, helping you get back on the road with a fully functional key fob in minutes. We’ll cover everything from identifying the correct battery type to programming your key fob after the battery replacement, if necessary.

If your 2007 Subaru key fob is acting up, it’s likely time for a new battery. Symptoms of a dying battery include reduced range, intermittent functionality, or the fob not working at all. Don’t worry, this is a common issue and easily remedied. Learn more about key fob for 2007 subaru outback.

What Type of Battery Does a 2007 Subaru Key Fob Use?

The 2007 Subaru key fob typically uses a CR2032 battery. This small, coin-shaped battery is readily available at most electronics stores, pharmacies, and online retailers. It’s a good idea to keep a spare on hand to avoid any unexpected lockouts. You can find more information on what type of battery does a subaru key fob take.

2007 Subaru Key Fob Battery CR2032 Replacement

How to Replace the Battery in Your 2007 Subaru Key Fob

This process is relatively simple and can be done with a small flathead screwdriver.

1. Locate the small notch or groove on the side of your key fob.
2. Carefully insert the flathead screwdriver into the notch and gently pry open the key fob casing. Be careful not to damage the plastic.
3. Once open, identify the CR2032 battery. Note its orientation.
4. Using the screwdriver, carefully remove the old battery.
5. Insert the new CR2032 battery, ensuring it is in the same orientation as the old one.
6. Snap the key fob casing back together.

Do I Need to Reprogram My Key Fob After Replacing the Battery?

In most cases, replacing the battery in a 2007 Subaru key fob does not require reprogramming. The fob should function normally once the new battery is installed. However, if you experience any issues, you can refer to your owner’s manual for reprogramming instructions, or visit our article on how to program a key fob for subaru forester 2007.

Troubleshooting Common Key Fob Issues

Sometimes, even after replacing the battery, a key fob may not function correctly. This could be due to a few different reasons.

• Incorrect Battery Installation: Ensure the new battery is correctly positioned and making good contact.
• Key Fob Damage: Inspect the key fob for any physical damage that might be interfering with its operation.
• Programming Issues: While rare, it’s possible the key fob needs to be reprogrammed.

“A common mistake people make is not paying attention to the battery orientation,” says John Smith, Senior Automotive Technician at Smith’s Auto Repair. “Make sure the positive (+) side of the battery is facing the correct direction.”

Maintaining Your Subaru Key Fob

Proper maintenance can extend the life of your key fob and prevent future issues. Keep your key fob dry and avoid exposing it to extreme temperatures. Also, check the battery regularly and replace it preemptively to avoid unexpected malfunctions. You can refer to subaru remote start key fob instructions for more tips.

Conclusion

Replacing the battery in your 2007 Subaru key fob is a simple and inexpensive process that anyone can do at home. By following the steps outlined in this guide, you can keep your key fob functioning properly and avoid any unnecessary trips to the dealership.

“Regular battery changes are an important part of car ownership,” advises Maria Garcia, Certified Automotive Electrician. “Don’t wait until your key fob stops working completely to replace the battery.”

FAQ

1. What type of battery does a 2007 Subaru key fob use? A CR2032 battery.
2. Where can I buy a replacement battery? Most electronics stores, pharmacies, and online.
3. Do I need to reprogram my key fob after replacing the battery? Usually, no.
4. What if my key fob still doesn’t work after replacing the battery? Check the battery installation, inspect for damage, or consult your owner’s manual for reprogramming instructions.
5. How often should I replace my key fob battery? Every 2-3 years, or when you notice reduced range or functionality.
6. Can I damage my key fob by replacing the battery myself? Yes, if you’re not careful. Use the correct tools and be gentle.
7. Is there a way to test my key fob battery? Yes, you can use a multimeter to test the voltage.

Common Scenarios and Questions

• Key fob intermittently working: This is often the first sign of a low battery.
• Key fob completely unresponsive: The battery is likely dead or incorrectly installed.
• Key fob works close to the car but not further away: This indicates a weakening battery.

Related Articles and Resources

For more information on Subaru key fobs and other related topics, check out our other helpful articles on our website.

Need further assistance? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team ready to help.