Subaru Forester Key Fob Battery 2016: Replacement, Programming, and Troubleshooting

A dead key fob battery can be a real headache, especially when you’re trying to get into your 2016 Subaru Forester. This comprehensive guide will walk you through everything you need to know about the Subaru Forester Key Fob Battery 2016, from identifying the right battery type to programming a new one. We’ll also cover some common troubleshooting tips and answer frequently asked questions.

Identifying the Right Subaru Forester Key Fob Battery

The 2016 Subaru Forester typically uses a CR2032 battery for its key fob. This is a common lithium coin cell battery available at most electronics stores, pharmacies, and even supermarkets. Always double-check your owner’s manual or the existing battery in your key fob to confirm the correct type before purchasing a replacement.

How to Replace Your 2016 Subaru Forester Key Fob Battery

Replacing the battery in your subaru forester key fob battery 2016 is a surprisingly simple process, often requiring only a small flathead screwdriver or a similar tool. You can usually find instructions in your owner’s manual. However, here’s a general guide:

1. Locate the small release button or notch on your key fob. This is usually on the back or side.
2. Gently insert your flathead screwdriver into the notch and carefully pry open the key fob casing. Be careful not to damage the plastic.
3. Identify the old CR2032 battery and carefully remove it. Note the orientation of the battery.
4. Insert the new CR2032 battery, making sure it’s positioned correctly in the same orientation as the old one.
5. Snap the key fob casing back together.

You can find more information about the 2009 Subaru Legacy key fob on our website.

Programming Your Subaru Forester Key Fob

In most cases, replacing the battery in a 2016 Subaru Forester key fob does not require reprogramming. The key fob should automatically reconnect to your vehicle once the new battery is installed. However, if you experience any issues, consult your owner’s manual for reprogramming instructions specific to your model. Sometimes, you may need to perform specific steps involving the ignition and door locks. If you encounter difficulties, it’s best to consult a qualified automotive locksmith or your Subaru dealership.

Troubleshooting Subaru Forester Key Fob Issues

Sometimes, even after replacing the battery, your key fob might not work. Here are a few troubleshooting steps you can try:

• Check the battery: Make sure the new battery is properly installed and isn’t damaged. Try a different new battery to rule out a faulty one.
• Try both key fobs: If you have a spare key fob, try using that one. If the spare works, it further confirms an issue with the original key fob and not the car’s receiver.
• Check for interference: Electronic devices and certain environmental factors can interfere with key fob signals. subaru key fob interference provides valuable insight into this issue. Move away from potential sources of interference and try again.
• Consult your owner’s manual: Your owner’s manual contains valuable information specific to your vehicle model, including key fob troubleshooting.
• Seek professional help: If all else fails, contact a qualified automotive locksmith or your Subaru dealership for assistance. You can also learn how to start subaru if key fob wont.

If you’re interested in replacing your key fob for a 2009 Subaru Forester, visit our page on 2009 subaru forester key fob replacement. More information on the subaru forester 2016 key fob battery can be found here.

Conclusion

Replacing your subaru forester key fob battery 2016 is a relatively straightforward task that most car owners can handle themselves. By following the steps outlined in this guide and utilizing the troubleshooting tips, you can save time and money. Remember, maintaining your key fob is a crucial aspect of vehicle ownership, ensuring convenient access and a smooth driving experience.

FAQ

1. How long does a Subaru Forester key fob battery last? Typically, 2-3 years.
2. What type of battery does a 2016 Subaru Forester key fob use? A CR2032 battery.
3. Do I need to reprogram my key fob after replacing the battery? Usually not, but consult your owner’s manual.
4. What if my key fob still doesn’t work after replacing the battery? Try the troubleshooting steps outlined in this article or consult a professional.
5. Where can I buy a replacement CR2032 battery? Most electronics stores, pharmacies, and supermarkets.
6. What can cause interference with my key fob signal? Other electronic devices or certain environmental factors.
7. Can I replace my Subaru Forester key fob myself? Yes, but programming can be tricky, so consult a professional if needed.

Common Scenarios:

• Key fob works intermittently: This often indicates a dying battery that needs replacement.
• Key fob doesn’t work at all: Check the battery, try a spare key fob, and check for interference.
• Key fob unlocks the doors but won’t start the car: This could be a more serious issue requiring professional diagnosis.

Other Helpful Resources on KEYFOBPROG:

• Information on starting your Subaru if the key fob doesn’t work.

Need assistance? Contact us on WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.