Subaru Impreza 2013 Key Fob Battery: Replacement, Programming, and FAQs

Replacing the key fob battery in your 2013 Subaru Impreza is a simple task that can save you time and money. This guide will walk you through the process, offering helpful tips and answering frequently asked questions. We’ll also discuss common issues and their solutions so you can get back on the road quickly.

How to Replace Your 2013 Subaru Impreza Key Fob Battery

A dead key fob battery can be incredibly frustrating. Luckily, changing it is often a quick DIY project. Here’s a step-by-step guide:

Gather your tools: You’ll need a small flathead screwdriver or a similar tool to pry open the key fob. You’ll also need a new CR2032 battery, readily available online or at most stores.
Locate the release slot: On the side of your Subaru Impreza key fob, you’ll find a small release slot.
Open the key fob: Carefully insert the flathead screwdriver into the release slot and gently pry the two halves of the key fob apart. Be careful not to damage the internal components.
Remove the old battery: Once the key fob is open, you’ll see the CR2032 battery. Gently pry it out using your screwdriver or fingernail.
Install the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side is facing up.
Close the key fob: Align the two halves of the key fob and press them together until they snap shut.

Programming Your Subaru Impreza 2013 Key Fob

In most cases, replacing the Subaru Impreza 2013 Key Fob Battery doesn’t require reprogramming. However, if your key fob still isn’t working after replacing the battery, you might need to reprogram it. Check your owner’s manual for specific instructions or consult a professional. You can also find information on how to get a new key fob for subaru.

Common Issues and Solutions

Sometimes, even after replacing the battery, your key fob might not work. Here are a few common issues and how to fix them:

Key fob still not working: Try reprogramming the key fob following the instructions in your owner’s manual.
Key fob works intermittently: This could indicate a faulty key fob or a weak battery. Try replacing the battery again. If the problem persists, consider getting a new key fob.
Key fob won’t unlock the car: Check the car battery. A dead car battery can prevent the key fob from working.

Why is My Subaru Impreza 2013 Key Fob Not Working?

Several reasons can cause your 2013 Subaru Impreza key fob to malfunction. A dead battery is the most common culprit, but other issues, such as a faulty key fob or a problem with the car’s receiver, can also be the source. For help with older models, check out information on 2012 subaru impreza key fob programming.

“Regularly checking and replacing your key fob battery can prevent unexpected lockouts,” advises John Smith, a certified automotive locksmith with over 20 years of experience. “It’s a small task that can save you a lot of hassle in the long run.”

How Long Does a Subaru Impreza Key Fob Battery Last?

Typically, a Subaru Impreza key fob battery lasts between 3 to 5 years. However, this can vary depending on usage and environmental factors.

Conclusion

Replacing a subaru impreza 2013 key fob battery is a simple and inexpensive process that most car owners can handle themselves. By following the steps outlined in this guide, you can save yourself a trip to the dealership and get back on the road quickly.

FAQs

What type of battery does a 2013 Subaru Impreza key fob use? A CR2032 battery.
How do I know if my key fob battery is dead? Your car might not respond to the key fob, or the range might be significantly reduced.
Do I need to reprogram my key fob after replacing the battery? Usually not, but it might be necessary in some cases.
Where can I buy a new CR2032 battery? Most stores that sell batteries, as well as online retailers.
How much does a new key fob cost? Prices vary, but expect to pay anywhere from $50 to $200.
Can I replace the key fob myself? Yes, in most cases.
What if I replace the battery and the key fob still doesn’t work? Try reprogramming the key fob or consult a professional.

Common Scenarios

Scenario 1: Car doesn’t respond to key fob. Solution: Replace the key fob battery.
Scenario 2: Key fob works intermittently. Solution: Check battery connection or replace the battery.
Scenario 3: Key fob won’t unlock car, but will lock it. Solution: Check car battery.

How to Replace Your Car Key
Understanding Keyless Entry Systems

Need further assistance? Contact us via Whatsapp: +1 (641) 206-8880 Or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our customer service team is available 24/7.