Is your Tesla Model X key fob displaying a low battery warning on the touchscreen? Don’t worry, replacing the battery in your Tesla Model X key fob is a straightforward process you can easily do yourself. This guide will walk you through each step to ensure a smooth and successful Tesla Model X Key Fob Replacement, getting you back on the road quickly. A functional key fob is crucial for accessing and operating your Tesla Model X, and understanding how to maintain it, including battery replacement, is a key part of Tesla ownership.
Step-by-Step Guide to Replacing Your Tesla Model X Key Fob Battery
When your Tesla Model X indicates a low key fob battery, it’s time for a replacement. The battery life typically lasts up to a year under normal use, but this can vary. Here’s how to replace it:
-
Prepare Your Key Fob and Tool: Place your Tesla Model X key fob button side down on a soft cloth to protect it from scratches. You’ll need a small flat-bladed tool, like a small screwdriver or even a guitar pick.
For key fobs with a lanyard, you can use it to your advantage. Position your thumb on the ‘X’ marked on the bottom cover. Then, firmly pull the lanyard away from the fob. This action leverages the lanyard to push the key off its cover. Alternatively, you can use your flat-bladed tool, a fingernail, or the tool provided by Tesla, inserting it where the lanyard cord attaches to gently pry the cover open.
-
Remove the Old Battery: Once the bottom cover is released, you’ll see the battery. Gently remove the old battery by lifting it away from the retaining clips that hold it in place.
-
Insert the New Battery: The Tesla Model X key fob uses a CR2354 battery. Make sure you have a fresh CR2354 battery ready. When handling the new battery, avoid touching the flat surfaces as fingerprints can shorten its lifespan. Insert the new CR2354 battery with the ‘+’ side facing upwards.
It’s important to ensure the battery is correctly seated. The battery should press against the spring on the positive contact. Avoid placing the battery directly on top of the contact and forcing it downwards, as this could damage the contact spring.
You can purchase CR2354 batteries from most retailers that sell batteries, including drugstores, supermarkets, and online marketplaces.
-
Reattach the Key Fob Cover: Hold the bottom cover at a slight angle and align the tabs on the cover with the corresponding slots on the key fob. Press the cover firmly until it snaps securely back into place. You should hear a click indicating it’s properly closed.
-
Test the Key Fob: After replacing the battery and reassembling the key fob, test its functionality. Unlock and lock your Tesla Model X using the key fob buttons to ensure it’s working correctly. If it’s functioning as expected, you’ve successfully completed your tesla model x key fob replacement!
Important Warnings and Safety Information
It’s crucial to handle key fob batteries with care and be aware of the safety warnings:
- Chemical Burn Hazard: Tesla key fob batteries pose a chemical burn risk. Do not ingest them.
- Keep Away from Children: Key fobs contain small coin cell batteries. If swallowed, these batteries can cause severe internal burns within just two hours and can be fatal. Keep both new and used batteries away from children at all times.
- Secure Battery Compartment: Always ensure the battery compartment is securely closed after replacement. If it doesn’t close properly, stop using the key fob and keep it away from children.
- Seek Medical Attention Immediately: If you suspect a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.
By following these steps, you can confidently perform a tesla model x key fob replacement and maintain the functionality of your Tesla Model X key fob. Regular maintenance and prompt battery replacement when indicated will ensure you always have reliable access to your vehicle.
