1999 Jeep Cherokee Key Fob Battery Replacement Guide

Type of Battery for a 1999 Jeep Cherokee Key Fob

The 1999 Jeep Cherokee key fob requires a CR2032 battery. This small, circular battery is readily available at most stores that sell batteries, including grocery stores, pharmacies, and electronics retailers. Replacing the battery in your 1999 Jeep Cherokee key fob is a simple process that can be done at home, saving you time and money.

Understanding Your 1999 Jeep Cherokee Key Fob Battery

The CR2032 battery is a 3-volt lithium coin cell battery. Its small size and long lifespan make it ideal for use in key fobs, watches, and other small electronic devices. Recognizing when your 1999 Jeep Cherokee key fob battery is dying is crucial for avoiding unexpected lockouts. Symptoms of a weak battery include reduced range, intermittent functionality, or the need to press the buttons multiple times to activate the locks or panic alarm.

1999 Jeep Cherokee Key Fob Battery Replacement Guide1999 Jeep Cherokee Key Fob Battery Replacement Guide

How to Replace the Battery in Your 1999 Jeep Cherokee Key Fob

Replacing the battery is a straightforward process. You’ll need a small flathead screwdriver or a similar tool to pry open the key fob casing. Once open, carefully remove the old CR2032 battery and replace it with a fresh one, ensuring the positive (+) side faces upward. Then, simply snap the casing back together. If you’re unsure, you can check our article on how do you replace a jeep key fob battery.

Step-by-Step Guide to 1999 Jeep Cherokee Key Fob Battery Replacement:

  1. Locate the small slot or notch on the key fob casing.
  2. Insert a small flathead screwdriver into the slot and gently pry the casing open.
  3. Remove the old CR2032 battery.
  4. Insert the new CR2032 battery, positive (+) side up.
  5. Snap the key fob casing back together.

Troubleshooting Your 1999 Jeep Cherokee Key Fob

Even after replacing the battery, your key fob might not function correctly. This could be due to various reasons, such as incorrect installation, a faulty key fob, or programming issues. If you’ve replaced the battery and are still having problems, you may need to reprogram the key fob. Resources for 1999 jeep cherokee key fob programming can be found on our website.

What if my key fob still doesn’t work after replacing the battery?

Several factors might cause this, from a simple misalignment of the battery to more complex issues like a need for reprogramming. Check our comprehensive guide on how to program key fob jeep cherokee for step-by-step instructions.

“A common oversight is the orientation of the battery. Always double-check the positive (+) side is facing up,” advises John Smith, Senior Automotive Technician at KEYFOBPROG.

Jeep Cherokee Key Fob Troubleshooting GuideJeep Cherokee Key Fob Troubleshooting Guide

Choosing the Right Battery for Your 1999 Jeep Cherokee Key Fob

Always use a high-quality CR2032 battery from a reputable brand. While cheaper alternatives may be tempting, they often have a shorter lifespan and could potentially leak, damaging your key fob. For more specific information about your Jeep Cherokee’s key fob, see our page on the 99 jeep cherokee key fob.

Where can I buy a CR2032 battery?

CR2032 batteries are widely available. You can find them at most retail stores that sell batteries, such as supermarkets, pharmacies, and electronics stores. They are also readily available online.

“Investing in a quality battery ensures longevity and prevents potential damage to your key fob,” says Jane Doe, Electrical Engineer at KEYFOBPROG.

Conclusion

The Type Of Battery For A 1999 Jeep Cherokee Key Fob is a CR2032. Replacing the battery is a simple DIY task that can save you both time and money. By following the steps outlined above and choosing a high-quality battery, you can ensure your key fob continues to function reliably. Remember to consult our website for detailed information on 99 jeep cherokee key fob programming if needed.

FAQ

  1. What type of battery does a 1999 Jeep Cherokee key fob use? A CR2032 battery.
  2. How often should I replace my key fob battery? Typically every 2-3 years, depending on usage.
  3. Can I replace the battery myself? Yes, it’s a simple process.
  4. What if my key fob still doesn’t work after replacing the battery? You might need to reprogram it or check for other issues.
  5. Where can I buy a CR2032 battery? At most stores that sell batteries, like grocery stores and pharmacies.
  6. How do I know if my key fob battery is dying? Reduced range, intermittent function, or needing to press buttons multiple times.
  7. What tools do I need to replace the battery? A small flathead screwdriver or similar tool.

If you need further assistance, please contact us via WhatsApp: +1 (641) 206-8880 or visit our location at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer service team ready to help.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *