Lost your key fob or need to program a new remote for your 2000 Nissan Xterra? Don’t worry, programming your key fob yourself is a straightforward process that can save you time and money compared to dealership programming. This guide provides clear, easy-to-follow instructions to get your 2000 Nissan Xterra key fob programmed quickly and efficiently.
Step-by-Step Guide to Program Your 2000 Nissan Xterra Key Fob
Follow these steps carefully to program your 2000 Nissan Xterra key fob:
Step 1: Prepare Your Vehicle for Programming
Begin by ensuring all doors of your Nissan Xterra are closed and locked. Use the power lock switch located on the driver’s side door panel to lock all doors. This initial step is crucial for initiating the programming sequence.
Step 2: Enter Programming Mode
This step requires a specific key insertion sequence. Insert your key into the ignition switch, and then remove it completely. Repeat this insert and remove action at least six times, but do it within a 10-second timeframe. If you perform this step correctly, the hazard lights on your Nissan Xterra will flash. This flashing indicates that your vehicle has successfully entered programming mode. Note: Make sure to fully withdraw the key from the ignition cylinder each time. Performing this step too quickly might prevent the system from entering programming mode.
Step 3: Program the First Key Fob
Once your vehicle is in programming mode (hazard lights flashing), insert the key back into the ignition and turn it to the “ACC” (Accessory) position. Within five seconds of turning the key to ACC, press any button on the key fob you wish to program. After pressing a button, your hazard lamps should flash again. Important: Only press the button on the remote once. Multiple presses during this step can lead to programming failure.
Step 4: Program Additional Key Fobs (If Necessary)
If you have additional key fobs to program, or if you are reprogramming existing remotes, you can do so now. First, use the power lock/unlock switch on the driver’s side door panel to unlock and then lock all doors. Within five seconds of locking the doors, press any button on the next key fob you want to program. Again, the hazard lamps should flash to confirm successful programming. Repeat this step for each additional key fob, including any previously programmed remotes you want to continue using.
Step 5: Exit Programming Mode and Test
To finalize the programming process, turn the ignition key to the “off” position and remove it from the ignition. Unlock the driver’s side door using the power lock switch and open the driver’s door. Now, test all programmed key fobs to ensure they are working correctly by locking and unlocking the doors and activating other remote functions.
If you encounter any difficulties programming your key fob, or if you prefer professional assistance, you can search for a local key fob programming service in your area by entering your city or zip code in online search engines. Alternatively, for replacement key fobs for your 2000 Nissan Xterra and other vehicles, visit Keylessentryremotefob.com.
