Are you having trouble with your 2007 Honda Accord key fob? Perhaps it’s stopped working, or you’ve purchased a new one. Luckily, programming a key fob for your 2007 Honda Accord can often be done yourself at home, saving you a trip to the dealership. This guide provides simple, step-by-step instructions to program your 2007 Honda Accord key fob, ensuring you regain convenient keyless entry and remote locking/unlocking.
Before you begin, it’s important to note that initiating the programming sequence will erase all previously programmed remotes. Therefore, you will need to reprogram all of your key fobs during this process, not just the new one. Make sure you have all remotes you intend to use ready before starting. Also, each step must be completed within 5 seconds of the last to prevent the system from exiting programming mode prematurely.
Here’s how to program your 2007 Honda Accord key fob:
-
Turn the ignition to the ON position (II). This is the position right before you would start the engine.
-
Press the LOCK or UNLOCK button on one of your key fobs. It doesn’t matter if the remote is currently programmed or not for this step.
-
Turn the ignition to the LOCK (0) position. This is the position where the car is completely off.
-
Repeat steps 1, 2, and 3 two more times. Use the same key fob button as in step 2 for all repetitions. You will have cycled the ignition ON, pressed the button, and turned OFF a total of three times.
-
Turn the ignition switch back to the ON position (II) again.
-
Press the LOCK or UNLOCK button on the same key fob used previously. At this point, the power door locks should cycle (lock then unlock) automatically. This confirms that you have successfully entered programming mode.
-
Program each remote: Press the LOCK or UNLOCK button on each key fob you wish to program, including the original ones and any new ones. After pressing a button on each remote, you should hear the door locks cycle again, indicating that the system has accepted the signal from that remote.
-
Turn the ignition switch to the LOCK (0) position. This will exit the programming mode.
-
Test your remotes. Press the LOCK and UNLOCK buttons on each programmed key fob to ensure they are working correctly and controlling the door locks.
By following these straightforward steps, you should be able to successfully program your 2007 Honda Accord key fob. If you are still experiencing issues, double-check each step and ensure you are completing them within the 5-second timeframe. If you need a replacement key fob for your 2007 Honda Accord, you can find a wide selection at Keylessentryremotefob.com. You can order the compatible key fob part number OUCG8D-380H-A directly from our store.
