Programming Your 2007 Subaru Outback Key Fob: A Comprehensive Guide

Is your 2007 Subaru Outback Key Fob malfunctioning, or did you recently purchase a new remote and need to get it programmed? You’ve come to the right place. As your trusted automotive locksmith experts at keyfobprog.com, we provide detailed, easy-to-follow instructions to help you program your key fob yourself. This guide will walk you through the process step-by-step, saving you time and money compared to dealership programming costs.

Before we begin, it’s important to understand the type of key fob you have for your 2007 Subaru Outback, as the programming procedure may vary slightly depending on the remote style.

1. First, locate the ID number inside your remote. Depending on your key fob style, you’ll need to remove the back cover. For some models, this involves using a bladed screwdriver to gently pop it open. Others might require unscrewing the back cover with a Phillips head screwdriver.

2. Once open, identify the eight-digit ID number located inside the remote. Crucially, if you see two rows of numbers, use the row containing only numbers and no letters. Write this number down, as you’ll need it for the programming sequence.

   • REMOTE A: This procedure will program the remote functions completely, including locking, unlocking, and panic button features.
   • REMOTE B: This procedure will only program the remote’s keyless entry functions. For the key to start the car, you will need to have the key blade cut and the transponder chip programmed by a professional locksmith or dealership.

Now that you have identified your remote type and located the ID number, let’s proceed with the programming steps. Please read through these instructions carefully before starting. It may seem complex at first, but following each step methodically will ensure success. Don’t worry if it doesn’t work on the first try; you can repeat the process as many times as needed.

Step-by-Step Programming Instructions for Your 2007 Subaru Outback Key Fob

1. Ensure all doors are closed, including the trunk or liftgate.
2. Get into the driver’s seat and close the driver’s door. Make sure all doors are securely shut before proceeding immediately to the next step.
3. Turn the ignition key from the “LOCK” position to the “ON” position 10 times rapidly within 15 seconds. “ON” is the position just before you would crank the engine to start. You will be turning the key back and forth between “LOCK” and “ON” quickly.
4. Confirmation: If done correctly, the vehicle will respond by flashing its lights and emitting an audible tone. This indicates that your 2007 Subaru Outback has successfully entered programming mode. If you do not see the lights flash or hear the tone, exit the vehicle, double-check that all doors are closed, and repeat steps 3 and 4.
5. Open and then close the driver’s side door. This action confirms to the system that you are still in programming mode, and you should hear the audible tone continue.
6. Enter the 8-digit ID code using the driver’s side door lock button. Refer back to the 8-digit code you wrote down earlier. For each digit in your code, press the LOCK button the corresponding number of times, followed by pressing the UNLOCK button once to move to the next digit. Repeat this for all eight digits of your code. For example, if your code were 12345678 (this is just an example – use your actual code), you would perform the following sequence:
   • Press LOCK once, then press UNLOCK.
   • Press LOCK twice, then press UNLOCK.
   • Press LOCK three times, then press UNLOCK.
   • Continue this pattern until you have entered all eight digits.
   • After entering the eighth digit, press the UNLOCK button one final time.
7. Repeat step 6. You must enter the entire 8-digit code again, exactly as you did in step 6. Once you have finished entering the 8th digit for the second time, you should hear a tone that lasts for approximately 30 seconds. This tone signifies successful programming.
8. Programming Additional Remotes (Optional): If you have more key fobs to program for your 2007 Subaru Outback, repeat steps 3 through 8 for each additional remote.
9. Exit Programming Mode: If you have programmed all desired remotes, simply remove the key from the ignition. The programming process is now complete. Test each remote to ensure it is working correctly by locking and unlocking your doors and testing the panic button (if applicable to your remote type).

Troubleshooting Tips

• Vehicle Not Entering Programming Mode: If you don’t get the light flashes and audible tone after step 4, ensure you are turning the key to the “ON” position (not starting the engine) and that you are completing the 10 cycles within 15 seconds. Also, double-check that all doors are fully closed.
• Programming Fails After Entering Code: Double-check that you are entering the correct 8-digit code from inside your remote and that you are accurately pressing the LOCK and UNLOCK buttons the correct number of times for each digit. Ensure you are also repeating step 7 correctly.
• Remote Works Partially: If you have REMOTE B and only the remote functions are working but the key won’t start the car, you will need to get the transponder chip programmed and the key blade cut by a professional.

If you encounter persistent difficulties programming your 2007 Subaru Outback key fob, or if you prefer to have a professional handle the programming for you, we can help!

Search for a local key fob programming professional.

Simply enter your city or zip code in the search box above to find a qualified key fob installer in your area. Let keyfobprog.com connect you with trusted professionals who can assist with all your key fob needs. We are committed to providing helpful resources and connecting you with expert services to keep you on the road.