How to Program a 2009 Cadillac SRX Key Fob: A Step-by-Step Guide

Lost your key fob or need to program a new one for your 2009 Cadillac SRX? Don’t worry, programming your keyless entry remote can often be done right at home without a trip to the dealership. As your trusted auto repair expert from keyfobprog.com, I’ll walk you through the simple steps to program your 2009 Cadillac Srx Key Fob, ensuring you regain convenient access to your vehicle.

This guide provides two procedures depending on whether your Cadillac SRX is equipped with Driver Information Center (DIC) buttons. Let’s find the right method for your vehicle and get your key fob programmed quickly.

Method 1: For 2009 Cadillac SRX Models With Driver Information Center Buttons

If your Cadillac SRX has Driver Information Center buttons on the steering wheel, follow these instructions to program your key fob:

  1. Ignition ON: Insert your key into the ignition and turn it to the ON position. This is the position right before you would start the engine. This step allows you to access the Driver Information Center through your steering wheel controls.

  2. Access Vehicle Information Menu: Use the vehicle information button (often depicted as a car or “INFO” icon) on your steering wheel. Press this button repeatedly until you see the message PRESS TO RELEARN REMOTE KEY displayed in the Driver Information Center.

  3. Initiate Learning Mode: Once you see the “PRESS TO RELEARN REMOTE KEY” message, press the set/reset button (often labeled “SET” or “RESET”) until the Driver Information Center displays REMOTE KEY LEARNING ACTIVE. This confirms that your Cadillac SRX is now in programming mode and ready to learn the new key fob.

  4. Program the First Key Fob: Take your first keyless remote and simultaneously press and hold both the lock and unlock buttons. Continue holding both buttons for approximately 15 seconds. After about 15 seconds, you should hear a chime. This chime indicates that the first remote has been successfully programmed to your 2009 Cadillac SRX.

  5. Program Additional Key Fobs (Optional): If you have additional key fobs to program, repeat step 4 immediately for each additional remote. Your Cadillac SRX can store up to a maximum of eight key fobs, so you can program multiple remotes if needed.

  6. Exit Programming Mode and Test: To exit the key fob programming mode, simply turn the ignition key to the OFF position and remove the key from the ignition. Now, test each of your programmed key fobs to ensure they lock and unlock the doors and activate other remote functions as expected.

Method 2: For 2009 Cadillac SRX Models Without Driver Information Center Buttons

If your 2009 Cadillac SRX model does not have Driver Information Center buttons, you can still program your key fob using a slightly different procedure that utilizes the trip odometer reset stem:

  1. Ignition ON and Park: Ensure your vehicle is in Park (P) and insert the key into the ignition. Turn the key to the ON position – this is as far as you can turn it without actually starting the engine.

  2. Access Relearn Remote Key Message: Locate the trip odometer reset stem on your instrument panel. Press and release this stem repeatedly until the Driver Information Center (or the display where the odometer is shown) displays the message RELEARN REMOTE KEY.

  3. Activate Learning Mode: Once the “RELEARN REMOTE KEY” message is visible, press and hold the trip odometer reset stem for approximately three seconds. After holding for three seconds, the message will change to REMOTE KEY LEARNING ACTIVE, indicating the vehicle is in programming mode.

  4. Program the First Key Fob: Take your first keyless entry remote and press and hold both the lock and unlock buttons at the same time for about 15 seconds. Listen for a chime, which will sound after approximately 15 seconds to confirm successful programming of the remote.

  5. Program Additional Key Fobs (Optional): If you have more key fobs to program, repeat step 4 for each additional remote immediately after programming the first. Remember, you can program up to eight remotes for your 2009 Cadillac SRX.

  6. Exit and Test: Turn the ignition key to the OFF position and remove the key to exit the programming sequence. Test all programmed key fobs to verify they are working correctly with your vehicle.

By following the appropriate steps for your 2009 Cadillac SRX model, programming your key fob should be a straightforward process. Enjoy the convenience of your keyless entry system! If you encounter any issues or prefer professional assistance, always consult a certified automotive technician or your local Cadillac dealership.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *