Is your 2009 Dodge Avenger Key Fob not working, or did you get a replacement and need to program it? Fortunately, if you have two working key fobs, you can program a new key fob yourself right at home. This guide will walk you through the steps to program a 2009 Dodge Avenger key fob, ensuring you can get back on the road with a fully functional remote. If you’re looking for a replacement key fob, or need programming services, remember to visit us at Keylessentryremotefob.com for all your key fob needs.
2009 Dodge Avenger Key Fob, Part Number 56040652AC, Two Button Remote
Important Prerequisites Before You Begin
Before starting the programming procedure for your 2009 Dodge Avenger key fob, please take note of these crucial requirements:
- USA Built Vehicles Only: This programming procedure is specifically for Dodge Avenger vehicles manufactured in the United States.
- Two Working Key Fobs Required: You must have two already programmed and working key fobs to successfully add a third key fob using this method.
- Single Working Key Fob Limitation: If you only possess one working key fob, this procedure will not work to program an additional key fob. You will need professional diagnostic programming in this case.
Step-by-Step Programming Instructions
Follow these steps carefully to program your 2009 Dodge Avenger key fob:
-
Initial Key Activation: Take your first working programmed key fob and insert it into the ignition. Turn the ignition to the “ON” position, ensuring you do not crank the engine. Hold it in this “ON” position for 5 seconds. After 5 seconds, turn the key to the “OFF” position and remove it from the ignition.
-
Second Key Activation: Within 5 seconds of removing the first key, insert your second working programmed key fob into the ignition. Again, turn the ignition to the “ON” position without starting the engine. Keep it in the “ON” position.
-
System Recognition and Alert: Within approximately 10 seconds, the vehicle’s security light should begin to flash. You may also hear a chime sound. (Note: Some 2009 Dodge Avenger models may only flash the security light without a chime). Once you observe the flashing security light and/or hear the chime, turn the key to the “OFF” position and remove it.
-
New Key Fob Programming: Now, within 5 seconds, insert your new, uncut key fob into the ignition. Turn the ignition to the “ON” position (do not start the engine).
-
Confirmation of Programming: The security light should start flashing again. Within 10 seconds, you should hear a chime (if your vehicle is equipped) and then the security light should turn off. The security light turning off indicates that the new key fob has been successfully programmed.
-
Final Steps and Testing: Turn the ignition to the “OFF” position and remove the newly programmed key fob.
-
Test Key and Remote Functions: Thoroughly test both the key’s ability to start the vehicle and the remote functions (lock, unlock, panic) to confirm successful programming.
Troubleshooting and Professional Help
If you encounter difficulties programming your 2009 Dodge Avenger key fob, or if you prefer professional assistance, we can help. You can easily find a qualified key fob installer in your area. Simply enter your city or zip code in our search tool at Keylessentryremotefob.com to locate a professional who can program your key fob for you.
