Need to program a 2009 Nissan Murano key fob? It’s easier than you think! This guide will show you how to perform 2009 Nissan Murano Key Fob Programming.
Step-by-Step 2009 Nissan Murano Key Fob Programming Guide
Follow these steps to program your 2009 Nissan Murano key fob:
Step 1: Lock Doors
Close and lock all doors using the driver’s side power lock switch.
Step 2: Ignition Cycle
Quickly insert and remove the key from the ignition at least six times within 10 seconds. Hazard lamps will flash when successful. Note: Cycles needed may vary.
Step 3: ACC Position
Insert the key and turn the ignition to the ACC position.
Step 4: Press Remote Button
Within 5 seconds, press any button on the remote once. Hazard lamps should flash.
Step 5: Additional Remotes
For more remotes, unlock and lock doors using the driver’s switch, then press a button on the next remote within 5 seconds. Repeat for each remote.
Step 6: Finish
Turn key OFF, remove key, unlock doors, and open the driver door.
You’ve successfully programmed your 2009 Nissan Murano key fob. Test it to ensure it’s working properly.
