Having trouble programming a key fob for your 2012 Nissan Versa? You’re not alone. Many owners find themselves locked out of the standard key fob programming procedure, even when their vehicle seems equipped for keyless entry. If you’ve checked for the keyless receiver (part #28595X) and BCM (part #284B1/2-9EG0A) under your glovebox, and still can’t get your Versa into programming mode, there’s a confirmed solution that involves your local Nissan dealership.
The key to enabling your 2012 Nissan Versa Key Fob functionality might lie within the Body Control Module (BCM) settings. Nissan Versa models come with different configurations, and sometimes, even with the necessary hardware installed, the keyless entry feature is disabled in the BCM software. This is where the dealership’s CONSULT III tool becomes essential. This specialized diagnostic tool allows technicians to manually adjust the BCM settings, specifically the “KEYLESS ENTRY” parameter.
According to Nissan’s official documentation, available in the service manuals, the initial configuration for some 2012 Versa models incorrectly sets the “KEYLESS ENTRY” to “WITHOUT.”
By using the CONSULT III tool, dealership technicians can change this setting to “WITH.” This adjustment activates the keyless entry system that is already physically present in your vehicle.
While this dealership visit may incur a cost (around $70-$80 is typical for diagnostic services), it’s often a worthwhile investment. Opting for this OEM-level solution ensures compatibility and reliability, especially when compared to aftermarket keyless entry systems. Aftermarket kits may introduce uncertainties in terms of installation, long-term performance, and integration with your Versa’s existing electronics. Leveraging the factory-installed system, once properly configured, offers a more seamless and dependable experience.
Once the dealership has adjusted the BCM setting, your 2012 Nissan Versa should be ready to recognize and be programmed to a compatible key fob. You can then proceed with the standard key fob programming procedure outlined in your owner’s manual, typically involving steps like closing doors, locking with the power lock switch, and turning the ignition key in a specific sequence. With the BCM correctly configured, your new 2012 Nissan Versa key fob should now work perfectly, providing you with the convenience of keyless entry.
